This is a JTAG programmer for esp targets based on esp-prog redone in Kicad.
The goal of this repo is to enable customization by adding or removing features. Feel welcome to fork the repo and share back your customizations through a pull request.
- FT2232H based
- Esp Jtag programming
- A separate serial port for debug
- SN74AH buffers for JTAG IO pins(5V/3V torelant)
- Rx/Tx status LEDs
- Autoprogram using RTS and DTS signals
Layout the PCB and route
Add LCSC.com BOM column
- Add digikey BOM column