This repository is a software product and is not official communication of the National Oceanic and Atmospheric Administration (NOAA), or the United States Department of Commerce (DOC). All NOAA GitHub project code is provided on an 'as is' basis and the user assumes responsibility for its use. Any claims against the DOC or DOC bureaus stemming from the use of this GitHub project will be governed by all applicable Federal law. Any reference to specific commercial products, processes, or services by service mark, trademark, manufacturer, or otherwise, does not constitute or imply their endorsement, recommendation, or favoring by the DOC. The DOC seal and logo, or the seal and logo of a DOC bureau, shall not be used in any manner to imply endorsement of any commercial product or activity by the DOC or the United States Government.
NOAA does not intend to patent this work worldwide. It may be used freely, but NOAA does not warrant its fitness for any use.
As a work of the United States Government, the associated schematics and software are in the public domain within the United States. Additionally, NOAA waives any potential copyright and related rights in the associated schematics and software worldwide through the Creative Commons Zero (CC0) 1.0 Universal Public Domain Declaration.
Repository for LCP Piston Driver PCB design and firmware.
This repository is home to the piston driver PCB design and firmware for the low-cost-profiler project (likely to be renamed).
The electrical/embedded engineer has left this project and therefore the project is incomplete. As of leaving, the piston does move to requested locations to within 0.008".
An RTOS should be added to this project to allow for i2c calls while movements are in progress.#
Develop has been merged with master until this project is picked back up