/voice-dyson

Use Alexa and a Raspberry Pi to control a Dyson fan

Primary LanguagePython

voice-dyson

A custom Alexa skill paired with a Raspberry Pi to control a Dyson Pure Hot+Cool HP01 purifying heater + fan

About

This repo contains code to run a custom Alexa skill on the Alexa Skills Kit Developer Console and a Flask web server on your Raspberry Pi to control a Dyson fan via IR signals.

Although this setup is intended for a specific device, these files may be modified to use Alexa to control any device that can be controlled with an IR remote.

User speech command -> Alexa skill -> JSON with parsed arguments -> Flask server -> LIRC -> Dyson fan changes state

Tested with Python 3.7 running Raspbian Buster 2019-06-20 using an IR Remote Shield v1.0

Setup

Alexa skill

The alexa-voice-model directory contains everything needed to configure your custom Alexa skill.

  1. Create a new skill - choose Custom for model and Provision your own for backend resources
  2. In the Alexa Skills Kit Developer Console, find your new skill, and click on View Skill ID. Save this string somewhere as we will need it for later for authentification
  3. Go to Edit->Interaction Model->JSON Editor
  4. Copy interaction_model.json to the JSON Editor and save model
  5. Go to Invocation and change Skill Invocation Name if desired. This will be the phrase that Alexa will listen for to activate your custom skill
  6. Go to Interaction Model->Intent and click on the new custom intents
  7. Under Sample Utterances, select Bulk Edit
  8. Upload <intent_name>_sample_utterances.csv for the respective intents, submit, and save model

Raspberry Pi

The following instructions will be performed on the Raspberry Pi command line.

Note that IR Remote Shield v1.0 needs to be attached to the GPIO pins for IR signals to send.

  1. git clone https://github.com/kvntng17/voice-dyson
  2. cd voice-dyson
  3. pip install -r requirements.txt
  4. Follow the instructions listed here to install LIRC for Raspbian Buster 4.19. It also contains instructions to create a custom config for your IR remote if desired
  5. sudo mv dyson.lircd.conf /etc/lirc/lircd.conf
  6. Open listen_alexa.py and locate the line that contains app.config["ASK_APPLICATION_ID"] = "amzn1.ask.skill.e033e61a-290c-46cf-b4cb-679d9ec858a4". Paste your own Skill ID here.
  7. sudo apt install tmux
  8. tmux
  9. ./bin/start_ngrok
  10. Copy the https://<unique_id>.ngrok.io address displayed on your screen. Save this address somewhere as we will need to supply it to our Alexa skill so our server can receive information from Alexa.
  11. Enter Ctrl-b and d to detach from this tmux session
  12. tmux
  13. python listen_alexa.py
  14. Enter Ctrl-b and d to detach from this tmux session

Link Alexa skill and Raspberry Pi

  1. Open the Alexa Skills Kit Developer Console
  2. Go to Edit->Endpoint
  3. Ensure HTTPS is selected
  4. Under Default Region, paste your ngrok address followed by /voice_dyson. It should look like https://<unique_id>.ngrok.io/voice_dyson
  5. Under the dropdown box, select My development endpoint is a sub-domain of a domain that has a wildcard certificate from a certificate authority
  6. Save Endpoints
  7. Go to Intents and Save Model and Build Model

Your setup should now be done! Make sure your ir-tx IR LED is pointed towards your device, and try a few commands.

Sample Commands

"Alexa, ask my fan to turn on."

"Alexa, ask my fan to turn off."

"Alexa, ask my fan to swivel."

"Alexa, ask my fan to change to hot."

"Alexa, ask my fan to change to hot at seventy degrees."

"Alexa, ask my fan to turn to eighty degrees."

"Alexa, ask my fan to change to cold."

"Alexa, ask my fan to change to cold on power level three."

"Alexa, ask my fan to turn to power level five."

Author

Kevin Tang