NXP/isochron

Issues

• Does isochron work on LS1028 switch port?

  #22 opened 8 months ago by xinliwang1992
  1

• Support of Intel i225 TAPRIO Offload Feature

  #21 opened 9 months ago by rezabfil-sec
  2

• Multiple isochron senders from the same host

  #20 opened 10 months ago by JorgeSasiain
  2

• Bizarre Uplink Latency measurements

  #19 opened a year ago by stefan-ramdhan
  12

• Using isochron with non time-aware machines within network

  #16 opened a year ago by stefan-ramdhan
  7

• Difference between linuxPTP PMC tool and isochron?

  #18 opened a year ago by xinliwang1992
  3

• Random Premature/Late Transmissions with Taprio Traffic Controller

  #17 opened a year ago by KalpShah999
  4

• Bidirectional Latency Measurement

  #15 opened a year ago by stefan-ramdhan
  13

• Premature/Late Transmission

  #14 opened a year ago by KalpShah999
  3

• Missing HW and SW timestamps

  #13 opened 2 years ago by SPYFF
  8

• How to ensure that the sending time of the data packet is completely consistent with the gating opening time of the TSN switch?

  #2 opened 3 years ago by 15367060916
  12

• isochron - received duplicate timestamp for packet key 0 already fully timestamped.

  #11 opened 3 years ago by jack04060201
  34

• failed to check sync status :interrupted system call

  #8 opened 3 years ago by 15367060916
  37

• PREEMPT_RT

  #7 opened 3 years ago by crow1814
  2

• 802.1CB protocol compliance

  #10 opened 3 years ago by Zhang-Jia
  3

• Rcv error

  #9 opened 3 years ago by SPYFF
  2

• Resource temporarily unavailable

  #6 opened 3 years ago by crow1814
  6

• make error

  #5 opened 3 years ago by crow1814
  3

• How to correctly use

  #4 opened 3 years ago by crow1814
  1

• 802.1CB 2 Board

  #1 opened 4 years ago by jman-88
  26