Doom-MCX

A port of prBoom to NXP MCXN MCU running Zephyr RTOS

Hardware


FRDM Development Board for MCX N947	LCD-PAR-S035 480x320 IPS LCD

Optional Joystick shield on FRDM-MCXN947 Arduino Header

Getting Started

Before getting started, make sure you have a proper Zephyr development environment. Follow the official Zephyr Getting Started Guide.

Initialization

The first step is to initialize the DOOM-MCX Zephyr workspace folder (doom-mcx-workspace) where doom-mcx and all Zephyr modules will be cloned. Run the following command:

# initialize  for the example-application (main branch)
west init -m https://github.com/nxphovergames/doom-mcx --mr main doom-mcx-workspace
# update Zephyr modules
cd doom-mcx-workspace
west update

Building

To build the application, run the following command:

cd doom-mcx
west build -p always -b frdm_mcxn947/mcxn947/cpu0

Flashing

Note

NXP Linkserver v1.5.30 or newer has to be installed.

To flash the application to the FRDM-MCXN947 board. Connect a USB-C cable to the "MCU-Link" USB-C port and run the following command:

west flash

Doom-MCX Controls

Doom-MCX supports 2 types of control either through touchscreen or the Joystick shield.

Touchscreen controls

Open doors/start: Tap "Use Area"
Fire: Tap "Fire Area"
Wake & Strafe Tap and drag in the "Virtual Joystick Area"

Caution

When using the Funduino shield make sure the switch is in 3V3 mode, otherwise you will damage the board.

Joytick Shield controls

Fire: D
Use: C
Walk: Joystick Y-axis
Strafe: Joystick X-axis
Menu: A

Simulation on PC

Zephyr RTOS also provides a native_posix target

To compile as native type:

west build -p always -b native_posix_64

To run type

cd doom-mcx
./build/zephyr/zephyr.elf

native_posix controls

Fire: CTRL
Use: Spacebar
Walk: Up-arrow & Down-arrow
Strafe: Left-arrow & Right-arrow
Menu: ESC

NXPHoverGames/Doom-MCX