Napsty/check_smart

Issues

• Incorrect output with sat+megaraid,[0-3]

  #98 opened 8 months ago by MegaS0ra
  3

• Kingston ssd wearout not detected

  #96 opened 10 months ago by sthibaul
  4

• No output after pipe

  #95 opened a year ago by goudeuk2000
  4

• Percent_Lifetime_Remain threshold unset with -w

  #92 opened a year ago by ymartin-ovh
  19

• Add TBW calculations for end of life prediction in SSDs

  #80 opened 3 years ago by Napsty
  1

• Call smartctl only once

  #14 opened 10 years ago by Napsty
  1

• Intel ssd wearout not reported when almost dead

  #86 opened 2 years ago by pschonmann
  9

• check_smart.pl very slow on Almalinux 8

  #87 opened 2 years ago by imorandinwnp
  1

• check_smart does not support General Purpose Log

  #52 opened 5 years ago by hansmi
  4

• flag to disable temperature check

  #82 opened 3 years ago by ggzengel
  2

• Wear_Leveling_Count is not reported as CRIT when disk is almost dead

  #73 opened 3 years ago by pschonmann
  7

• Percent_Lifetime_Remain usage

  #81 opened 3 years ago by eLvErDe
  5

• megaraid,N not work with 6.12

  #78 opened 3 years ago by PVasileff
  2

• 6.12.0 regression: invalid interface

  #76 opened 3 years ago by Napsty
  0

• No performance data on NVMe drive

  #74 opened 3 years ago by Napsty
  2

• Prioritise output by criticality

  #70 opened 3 years ago by peternewman
  14

• Handling dots in attribute names

  #62 opened 3 years ago by Napsty
  1

• add aacraid

  #63 opened 3 years ago by antonzhelyazkov
  5

• Add special monitoring on SSD attribute 202 (Percent_Lifetime_Remain)

  #66 opened 4 years ago by Napsty
  1

• Request: Auto detect and count all drive on system

  #65 opened 4 years ago by PVasileff
  0

• Add attribute 188 Command_Timeout to raw check list

  #61 opened 4 years ago by Napsty
  1

• Ignore overall health assessment

  #47 opened 4 years ago by deric
  1

• Warning thresholds does NOT give the expected result.

  #60 opened 4 years ago by tachtler
  2

• Threshold/atributes naming inconsistency

  #53 opened 4 years ago by karaluh
  1

• status line 2000GB Gigabyte AORUS M.2 2280 PCIe 4.0 x4 NVMe

  #58 opened 4 years ago by michaelschefczyk
  4

• -g flag doesn't work with nvme-devices

  #57 opened 4 years ago by extrad
  2

• --warn option doesn't work, -w works fine

  #54 opened 5 years ago by karaluh
  0

• -g doesn't work for -i sat

  #55 opened 5 years ago by karaluh
  1

• Add NVMe support

  #32 opened 5 years ago by Rohlik
  13

• Make -g option work for 3ware interface

  #30 opened 5 years ago by karaluh
  3

• Define default "raw attribute" check list

  #36 opened 5 years ago by Napsty
  1

• Unbale to match /dev/sd[a-z][a-z]* with -g

  #21 opened 5 years ago by samuraiii
  1

• Temperature reported twice in metrics for some drives

  #41 opened 5 years ago by MichiK
  4

• -w warning option never results in a warning

  #39 opened 5 years ago by joopmartens
  2

• Unable to check "virtual blockdevices" eg /dev/bus/0

  #37 opened 6 years ago by greno2
  12

• MegaRAID: errors not shown by disk ?

  #34 opened 6 years ago by Reiner030
  7

• Reallocated_Sector_Ct & Seek_Error_Rate

  #26 opened 6 years ago by brentclark
  4

• Is it possible to hide results like "No health status line found"

  #33 opened 6 years ago by HHawk
  2

• Feature request: An exclude-flag when using -g option

  #7 opened 6 years ago by goagex
  1

• Use of uninitialized value $exclude_list in split at ./check_smart.pl line 159.

  #29 opened 6 years ago by karaluh
  2

• Use of uninitialized value $device in string eq

  #31 opened 6 years ago by Napsty
  2

• Add a way to ignore temperature failures of the past

  #23 opened 6 years ago by Napsty
  2

• Attribute 190/194 with Seagate HDDs

  #15 opened 6 years ago by eltismerino
  2

• ATA read errors

  #16 opened 7 years ago by deric
  3

• New release / tag

  #24 opened 7 years ago by waja
  1

• Use of uninitialized value $device

  #19 opened 8 years ago by Napsty
  1

• Bug with -g parameter on FreeBSD

  #13 opened 10 years ago by Napsty
  3

• -g parameter is limited to 26 devices

  #5 opened 10 years ago by casparsmit
  5

• Output issue

  #3 opened 11 years ago by casparsmit
  19