Named pipes services

Examples (in C++ and Python) of how to design services that use named pipes FIFO as I/O.

Instead of implementing heavy web services or complex low-level network code, just read/write from/to files, and be done with it.

Introduction

Rationale

The problem of making two programs communicate is among the ones that generated the largest litterature and code in all computer science (along with cache invalidation, naming things, and web frameworks).

When facing such a problem, a programer immediatly thinks "I'll use middleware". If you don't really now what a middleware is, be at ease, nobody really knows. Nowadays, you may have eared of their latest avatar: web services. As our programmer is going to realize, one now have two problems. The burden of writing, using, and maintaining code using middleware is always huge. Because they are made to handle a tremendous number of features and complex situations —most of which involve adversary users, users being bots, or both.

But most of the time, the actual problem does not really involve these situations. At least not at the beginning (… which means probably never). People familiar with middleware history would argue that their key feature is not just messages passing but remote call, which involves object serialization. But most of the time, the messages are pretty simple anyway, and using a middleware to implement a serialization of a list of instances having three members of fundamental types is not a good use of your time.

If you are building up (firsts versions of) two communicating programs that will run on a (safe) local network, and for which the exchanged messages are known and simple, then I have good news: you don't have to use web services (or any kind of middleware).

YOU JUST NEED TO KNOW HOW TO READ/WRITE FROM/TO (SPECIAL) FILES.

Overview

The basic idea is that, instead of programming the network interface to your service with low level sockets or any high level library, you can just implement query/answer mechanisms using named pipes.

Named pipes are special FIFO files that are blocking on I/O and implements a very basic form of message passing, without having to bother with polling. Moreover, they are very easy to use, as they are just files in which you read/write.

Once you made your service on top of named pipes, it is easy to wrap it within an interface made with other languages/tools. For instance, it is very easy to expose it on the network using common tools like socat (see below).

Be warned that this is not secure, though, you should only use this for testing purpose in a secured local network.

Principle

The theoretical principle can be represented by this UML sequence diagram:

          Named pipes
         ┌─────┴─────┐
┌──────┐ ┌───┐   ┌───┐ ┌───────┐
│Client│ │OUT│   │IN │ │Service│
└───┬──┘ └─┬─┘   └─┬─┘ └───┬───┘
    │      │       │       │
    │      │       │┌──────╢
    │      │  block││ wait ║
    │ask   │       │└─────>║
    ├─────────────>│       │
    ╟─────┐│       ├──────>│
    ║wait ││block  │       ║process
    ║<────┘│       │       ║
    │      │<──────────────┤
    │<─────┤       │   tell│
    │      │       │       │

Notes:

the service is started first and is waiting for the input, but as processes are blocking, the starting order does not always matter.
there are two pipes, here (one for the input and one for the output), for the sake of simplicity, but you may just as well use only one.

When NOT to use named pipes

To be completely honest, here are a list of cases that —if they are all true— may lead you to consider that maybe it would be a good idea to think about how you may eventually end up looking for a solution that might be something that's close to a middleware:

☒ your service takes time to compute something,
☒ you have one service, but an unknown (large) number of clients,
☒ all clients expect the same interface,
☒ which involves answering to the server,
☒ with complex data structures,
☒ you absolutely need to serve them all as fast as possible,
☒ over the internet,
☒ and you are certain that no one will want another middleware in the next project.

I your use case don't match all of this checklist but you still want to use a middleware, maybe you should just consider making a side software that will expose/transliterate the data going through the named pipe. That way, your service stays simple and you can easily exchange one middleware for another without even touching it.

Build and run

Python code does not need to be built.

To build the C++ code on Linux, just call:

./build.sh

You may use the run_* scripts to see how to run the examples. For instance, for the most complex one:

./run_service2.sh

Examples

To create the named pipes under Linux or MacOS, use the mkfifo command, as shown in the build.sh script.

Creating named pipes on windows is more complex, you may want to look at the related Stack Overflow question

Trivial example: a `cat` service

The pcat executable implements a service that reads from a named pipe and print its content on the standard output. It's just like a cat command, but that would not end after the first read, but will continue reading from the pipe instead.

This kind of service is just a simple loop that iterates over blocking I/O calls on the named pipes, thus having zero CPU cost for polling.

The file run_pcat.sh shows how to run the example.

Note: if this example prints "Hello World!" multiple times, that's because you did not created the data file as a named pipe, but as a regular file. Hence, instead of emptying its content after reading, it keeps reading the same content.

The pcat.py is the same example, but in Python instead of C++.

Simple service

The first example ./service in out implements a service that reads from a named pipe in and writes to another one out.

Once launched, the service will wait for the pipes to be consummed, for instance with two commands. The first one writes input in the input pipe:

echo "data" > in

The second one reads the result:

cat out

The file run_service1.sh shows how to run this example.

Note that you can use the same pipe for input and output: ./service1 data data.

Service with two dependent inputs

The second example ./service2 context data out shows a service which depends on an initialization phase that set up a "context", after which it is possible to consume some "data".

The service use two threads, one to poll the context and one to poll the data and do something with it.

The script run_service2.sh shows how to test it. Run it and it should show Context: data as a last line.

Use Ctrl-C to close the remaining cat process.

Furthermore

Expose such services on network

If you want to expose such a service as a network server, just use socat.

For example, to get data query from the network for service1:

socat -v -u TCP-LISTEN:8423,reuseaddr PIPE:./data

(see run_socat_server.sh for a complete example).

You can test it by sending something on the connection:

echo "Hello World!" > /dev/tcp/127.0.0.1/8423

Conversely, to send automatically back the answer to some server:

socat -v -u PIPE:./out TCP2:8424:host

Be aware that socat will terminate as soon as it receives the end of the message. Thus, if you want to establish a permanent gate, you will have to use the fork option:

socat TCP-LISTEN:8478,reuseaddr,fork PIPE:/./data

Troubleshooting

If you witness strange behavior while debugging your own services (like prints that do not occur in the correct terminal), double check that yo don't have some remaining detached processes that would not have been killed.

For instance, if:

ps aux | grep pcat

returns anything, you would need to killall pcat, or else several concurent processes would read the same pipe, which leads to (almost) undefined behavior.

Author & license

Author: nojhan@nojhan.net

License: AGPLv3

NeloBlivion/named-pipes-services