Neotron-Compute/Neotron-32-Hardware

Issues

• Process drawings in CI

  #7 opened 5 years ago by thejpster
  4

• VGA amplifier

  #17 opened 5 years ago by thejpster
  3

• SD card is a pig to solder

  #22 opened 5 years ago by thejpster
  4

• Order v1.3.0 boards

  #23 opened 5 years ago by thejpster
  4

• Launchpad headers too tight

  #20 opened 4 years ago by thejpster
  0

• LDO holes too small

  #21 opened 4 years ago by thejpster
  1

• Hole near SD card in wrong place

  #19 opened 4 years ago by thejpster
  1

• Button doesn't fit through rear endpanel

  #16 opened 4 years ago by thejpster
  1

• 1.0 Bring Up

  #6 opened 5 years ago by thejpster
  1

• 1.0 PCBA

  #4 opened 5 years ago by thejpster
  1

• 1.0 Boards

  #3 opened 5 years ago by thejpster
  4

• SMT variant

  #18 opened 5 years ago by thejpster
  0

• No front endpanel

  #15 opened 5 years ago by thejpster
  0

• 1.0 PCB Layout

  #2 opened 5 years ago by thejpster
  4

• 1.0 Schematic

  #1 opened 5 years ago by thejpster
  6

• faulty schematic for audio section in Release 0.6

  #9 opened 5 years ago by IGBC
  2

• Power and reset switch

  #13 opened 5 years ago by thejpster
  2

• 1.0 PCBA Components

  #5 opened 5 years ago by thejpster
  2

• Add top level drawing

  #12 opened 5 years ago by thejpster
  1

• Add DCP detect circuit

  #8 opened 5 years ago by thejpster
  1

• Fix PS/2 footprint

  #11 opened 5 years ago by thejpster
  2

• Case

  #10 opened 5 years ago by thejpster
  1