Project status: Complete | Actively maintaining

Human Call Filter

Captcha for phone calls.

Overview
Features
- Phone Number
- Dashboard
Setup
Deploy
- Kubernetes
- Docker

Overview

Captcha for phone calls.

Human call filter operates a separate phone number that verifies callers are human before forwarding the call to a VOIP number.

This technique is able to prevent robot spam calls.

A dashboard is also provided to view information about calls which have been made to the human call filter operated phone number.

Features

Phone Number

When a call is made to the human call filter operated number the caller is asked a simple arithmetic question.

If the caller enters the correct answer, their call is forwarded to a VOIP number. If they answer the question incorrectly the call will be ended.

This allows you to trust that all calls which reach this VOIP number are from real humans and not spam bots.

Dashboard

A dashboard is provided which shows information about calls which have been made to the human call filter operated phone number.

Phone Numbers Page

The dashboard shows which numbers have placed calls:

Phone Calls Page

The dashboard shows all the calls which have been received:

Challenges Page

The dashboard shows the status of all the challenges which have been issued to users.

Setup

Configuration

Human call filter uses environment variables for configuration:

DESTINATION: Your VOIP address which verified humans will be forwarded to
- This value will be in the format:
```
 username@sip_sub_domain.sip.us1.twilio.com
```
  Replace username with the username you set while configuring the Twilio Elastic SIP Trunking Credentials List.
  
  Replace sip_sub_domain with the sub domain you set when configuring the Twilio Elastic SIP Trunking domain name
CALLS_HTTP_PORT: Port server responds to twilio call requests on, defaults to 8000
DASHBOARD_HTTP_PORT: Port server responds to internal dashboard request on, defaults to 8001
DB_HOST: Postgres connection host
DB_PORT: Postgres connection port, defaults to 5432
DB_NAME: Postgres database name
DB_USERNAME: Postgres username
DB_PASSWORD: Postgres password, optional

Audio Clips

Human call filter plays audio clips during calls to communicate with the caller.

These clips are located in the ./audio-clips/ directory.

./audio-clips/
- intro.mp3: Played before a caller is asked a challenge to verify they are human
- success.mp3: Played after a caller provides the correct answer to a challenge and before they are forwarded to the VOIP phone address
- fail.mp3: Played after a caller provides the wrong answer to a challenge and before the call is ended

It is recommended that you record your own versions of each of these clips. To ensure that callers who hear these clips know that they have reached your number.

Database

Human call filter stores information about calls in a Postgres database.

Set the database related configuration variables (start with DB) and run:

make migrate

This will run migrations on your database to setup the schema.

Twilio

Human call filter uses Twilio to interact with phone calls.

Programmable Voice
Elastic SIP Trunking

Programmable Voice

Navigate to the "Phone Numbers" dashboard.

First buy a number:

Navigate to the "Buy a Number" page in the dashboard
Buy a new number

Then configure the number:

Navigate to the "Manage Numbers" page in the dashboard
Click on the number you just bought
Under the "Voice" category set the following options:
- "Configure with" setting
  - Set to Webhooks, TwiML Bins, Functions, Studio, or Proxy
- "A call comes in" setting
  - First setting to Webhook
  - Second setting to http://<domain you deploy to>/call and HTTP POST
- " Primary handler fails" setting
  - First setting to TwiML
  - Click the plus button, a box will pop up, enter the following:
    - Enter CallDestination for the "Friendly Name"
    - Enter the following text in the main box:
      <?xml version="1.0" encoding="UTF-8"?> <Response> <Dial>Your destination number here</Dial> </Response>
      Make sure to replace Your destination number here with your actual phone number.
      
      This will forward calls to your phone if an error occurs.
  - Make sure the box above the plus button you just clicked is set to CallDestination

Elastic SIP Trunking

Navigate to the "Elastic SIP Trunking" dashboard.

First create a SIP trunk:

Navigate to the "Trunks" page in the dashboard
Create a new SIP trunk by clicking the red plus button in the upper left of the page

Next configure a login for the SIP trunk:

Navigate to the "Authentication" > "Credentials List" page in the dashboard
Create a new credentials list by clicking the red plus button in the upper left of the page
- You will use the username and password you enter to connect to the VOIP server from your phone

Finally configure a domain for the SIP trunk to serve requests from:

Navigate to the "Programmable Voice" dashboard
Navigate to the "SIP Domains" > "Domains" page in the dashboard
Create a voice SIP domain by clicking the red plus in the upper left of the page
- Under the "Properties" section set the "SIP URI" option to a sub-domain of your choosing
- Under the "Voice Authentication" page set the "Credentials List" option to the credentials list you created above
- Under the "SIP Registration" section click the "Enabled" option
- Under the "SIP Registration" section set the "Credential Lists" option to the credentials list your created above

Voice Over IP

Human call filter will forward calls which it knows are from humans to a voice over IP number.

This lets you be confident that every call that comes into this number is a human and not a spam robot caller.

In order to receive calls with this VOIP number you must install and configure a VOIP application on your phone.

If you are using an Android phone I recommend you use the Zoiper VOIP application. Unfortunately I do not have experience with VOIP applications on iPhones so I can not make a recommendation.

On your phone in the VOIP application of your choice add a new VOIP account:

Set the host to:
```
sip_sub_domain.sip.us1.twilio.com
```
Replace sip_sub_domain with the sub domain you set when configuring the Twilio Elastic SIP Trunking domain name
Set the username to the username you set while configuring the Twilio Elastic SIP Trunking Credentials List
Set the password to the password you set while configuring the Twilio Elastic SIP Trunking Credentials List

With your new VOIP number configured you can now begin receiving VOIP calls on your phone.

Deploy

Kubernetes

A Kubernetes Helm chart is located in the deploy/human-call-filter/ directory.

Deploy Overview

The Kubernetes deployment provided is fairly opinionated.

It makes a few assumptions:

You are running your Kubernets cluster on the Google Cloud Platform
External DNS is installed on your cluster
You are hosting a Postgresql database on the Google Cloud Platform using Cloud SQL

If any of these assumptions are not true for your deployment situation you may have to edit the Kubernetes deployment provided.

Deploy Configuration

Edit the deploy/human-call-filter/values.yaml file and change the following options:

gcp.cloudsql.connectionName: The connection name for your GCP CloudSQL instance

Then set the DESTINATION, DB_HOST, and DB_PASSWORD environment variables to their production values.

Deploy Run

To deploy run the following in the repository root:

git submodule init --update
./deploy/k8s-deploy/k8s-deploy deploy

Docker

A Docker image is published which runs the human call filter server.

Docker Overview

The image is named noahhuppert/human-call-filter and is published to the Docker hub.

The container tag is the source code git commit the image was built with. This will change with every release. Check the Docker hub for the latest tag.

Docker Run

Run the image by setting all the required environment variables and exposing the correct port for call HTTP traffic.

Make sure to not expose the dashboard HTTP port, as this shows private information without requiring authentication. Instead the dashboard port should be accessed via a private network.

Noah-Huppert/human-call-filter