NorthernWidget-Skunkworks/Project-Monarch

Issues

• Mounting plate: slightly closer slits for 1 1/8" U bolt

  #12 opened 4 years ago
  0

• FIRMWARE: Fix rollover compensation for timeout

  #11 opened 6 years ago
  0

• Add BME280 to Dyson Shortwave?

  #10 opened 6 years ago
  0

• Fix/verify filter topology on Short Wave Module

  #9 opened 6 years ago
  0

• Add voltage reference to Dyson SW

  #8 opened 6 years ago
  0

• Invert thermistor pair (short wave)

  #7 opened 6 years ago
  0

• No need to wait after Wire.requestFrom() and it should not be used together with Wire.beginTransmission or Wire.endTransmission().

  #6 opened 6 years ago
  0

• Change GND to something else

  #5 opened 6 years ago
  0

• Fix ground connector for VRef (Longwave)

  #4 opened 6 years ago
  1

• Fix inverted placement of pyrometer (longwave)

  #3 opened 6 years ago
  1

• Fix address silkscreen (Longwave)

  #2 opened 6 years ago
  1

• Add pullups on internal I2C line (short wave)

  #1 opened 6 years ago
  1