NorthernWidget-Skunkworks/Project-Symbiont-LiDAR

Issues

• Precise power consumption

  #14 opened 4 years ago
  0

• Status LED flash patterns

  #13 opened 4 years ago
  0

• Method to write/engrave xyz axes on enclosure

  #12 opened 4 years ago
  0

• Indicate accelerometer xyz on PCB silkscreen

  #11 opened 4 years ago
  0

• Enclosure

  #10 opened 4 years ago
  1

• Which software should we use to create the library?

  #9 opened 4 years ago
  2

• Which hardware is standard?

  #8 opened 4 years ago
  2

• Which firmware is the default?

  #7 opened 4 years ago
  2

• Add pulldown to `POWER_SW`

  #6 opened 5 years ago
  0

• Replace MOSFET with load switch

  #5 opened 5 years ago
  0

• Flip LED and MEMS accelerometer

  #4 opened 5 years ago
  0

• Remove 5V_SW pullups?

  #3 opened 5 years ago
  0

• Switch Cable Glands to Reduce Board Size

  #2 opened 5 years ago
  0

• Flip ICSP Connector?

  #1 opened 5 years ago
  0