/qemu-edi-demo

Primary LanguageC++

Description

This is demo for emBO++ 2021 talk "QEmu in-the-loop development" by Maciej Nowak.

  • Structure application into two runner (HW and QEmu)
  • Use EDI to interact with external simulators

In addition there are unit tests example included based on QEmu and GoogleTest. Due to GoogleTest dependencies on functionality not available in newlib, forked version is used.

Build

  1. Copy local-example.cmake as .local/local.cmake
  2. Modify .local/local.cmake to include correct paths to toolchain (arm-none-eabi), QEmu and OpenOCD
  3. Generate CMake build: cmake -DLOCAL_CFG=<src>/.local/local.cmake <src>
  4. Build project (cmake --build <build-dir> or make/ninja in build directory)

HW

  1. Get Blue Pill (STM32F103 board)
  2. Connect USB<->UART adapter to Blue pill (STM32's TX on PA9 pin to RX of adapter)
  3. Connect button between PB12 and GND
  4. UART adapter will receive logs (baudrate 115200)
  5. Pressing button will be recognized by software and trigger some logs

QEMU

  1. Create venv <build>/venv
  2. Install requirements <build>/venv/Scripts/pip install -r requirements.txt
  3. Start listener <build>/venv/Scripts/python <src>/host/listener.py
  4. Start QEMU: qemu-system-arm -machine virt_cortex_m -semihosting -semihosting-config enable=on,target=native -monitor null -kernel <build>/app/qemu_runner/app_qemu.elf -device kp-edi-group
  5. Listener will receive logs from firmware and simulate button press every few seconds

Unit tests

  1. Build unit_tests target
  2. Run QEMU: qemu-system-arm -machine virt_cortex_m -semihosting -kernel <build>/unit_tests/unit_tests.elf