This project contains the Slic3r profiles for the 3D printers produced by Prusa Research http://www.prusa3d.com/
- Slic3r settings MK2 - Settings for the Original Prusa i3 MK2 & MK2S & MK2MM & MK3
- Slic3r settings 175 - Settings for the Prusa i3 with a 1.75mm filament extruder
- Slic3r settings 3mm - Settings for the Prusa i3 with a 3mm filament extruder
To apply these settings, you have to copy the particular github folder (Slic3r settings MK2, MK2S, MK2MM and MK3 / Slic3r settings 175 / Slic3r settings 3mm) into a local folder, where Slic3r will find it. The destination depends on your operating system:
- Windows: "C:\Users\your_user_name\AppData\Roaming\Slic3r" or "C:\Documents and Settings\your_user_name\Application Data\Slic3r"
- Mac: "~/Library/Application Support/Slic3r/"
- Unix / Linux: "~/.Slic3r/"
In case you installed the Prusa3D Windows drivers package, the Start menu is filled in with Slic3r shortcuts. These shortcuts are stored in "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Prusa3D" and they point Slic3r to the particular settings folder using the --DataDir switch.
- "C:\Users\Public\Documents\Prusa3D\Slic3r settings MK2" for the MK2 & MK2S &MK2MM & MK3
- "C:\Users\Public\Documents\Prusa3D\Slic3r settings 175" for the legacy i3 with a 1.75mm extruder
- "C:\Users\Public\Documents\Prusa3D\Slic3r settings 3mm" for the legacy i3 with a 3mm filament extruder
Therefore if you installed the Windows drivers package from Prusa3D, you may as well extract the whole (Slic3r settings to "C:\Users\Public\Documents\Prusa3D".