Home Assistant integration for the water heater CLAGE DSX Touch connected through an Clage Homeserver

Integration for Homeassistant to view and Control the Clage Homeserver for continuous electric waterheaters via the local ip-interface via API Version 1.4.

Features

Register in Home Assistant in the UI based configuration flow (no yaml)
Show sensor values from the heater
Change the water temperature of the heater
No cloud connection needed to control the heater - only local ip-access needed.

Warning: WIP - Work in progress

This is an early version of the Integration (custom component). It uses the Python module clage_homeserver to connect to the REST API of the heater.

Installation

Option 1: Install it through HACS (recommended)

Option 2: Install it manually

Clone this repository

git clone https://github.com/klacol/homeassistant-clage_homeserver.git

Copy the content of the custom_components-Folder to the custom_components folder of your home-assistant installation

# mkdir -p <your-ha-config-dir>/custom_components
# cp -r custom_components/clage_homeserver <your-ha-config-dir>/custom_components

Install the integration and use the config flow in the frontent

Example Config

`configuration.yaml`

input_number:
  clage_homeserver_temperature:
    name: Soll-Temperatur
    min: 0
    max: 60
    initial: 45
    step: 1
    unit_of_measurement: °C

`automations.yaml`

- id: '38237023328'
  alias: 'clage_homeserver: set temperature based on input'
  description: ''
  trigger:
  - entity_id: input_number.clage_homeserver_temperature
    platform: state
  condition: []
  action:
  - data_template:
      homeserver_name: durchlauferhitzer_keller
      heater_id: 2049DB0CD7
      temperature: '{{ states(''input_number.clage_homeserver_temperature'') }}'
    service: clage_homeserver.set_temperature
- id: '38237023329'
  alias: 'clage_homeserver: set temperature input based on heater'
  description: ''
  trigger:
  - entity_id: sensor.clagehomeserver_durchlauferhitzer_keller_heater_status_setpoint
    platform: state
  condition: []
  action:
  - data_template:
      entity_id: input_number.clage_homeserver_temperature
      value: '{{ states.sensor.clagehomeserver_durchlauferhitzer_keller_heater_status_setpoint.state }}'
    service: input_number.set_value

O-Palda/homeassistant-clage_homeserver