Dance Radio

what you need to complete

Usage

Prepare the audio board:

Connect speakers or headphones to the board.
Connect MOD-LCD2.8RTP and led stripe to UEXT connector using UEXTx5 extender as follow:

led stripe: VCC on pin 1, GND on pin 2, DATA on pin 3

(note: Only LED-STRIPE-8 is supported)

Get ESP-ADF

sudo apt-get install git wget flex bison gperf python python-pip python-setuptools python-serial python-click python-cryptography python-future python-pyparsing python-pyelftools cmake ninja-build ccache libffi-dev libssl-dev
cd ~/
git clone --recursive https://github.com/espressif/esp-adf.git
cd esp-adf
git submodule update --init
export ADF_PATH=$PWD
cd esp-idf
./install.sh
. ./export.sh

Load the example:

cd ~/
mkdir espwork
cd espwork
git clone https://github.com/OLIMEX/dance_radio
cd dance_radio
make menuconfig

Configure the example:

Set up the Wi-Fi connection by running menuconfig > Example Configuration and filling in WiFi SSID and WiFi Password.
Choice used Audio board type: menuconfig > Audio board select...

Optional:
Choice used Led stripe: menuconfig > Led stripe > Led stripe... (currently only Led stripe 8 is supported)
Choice led stripe mode: menuconfig > Led stripe > Led stripe mode...

Run the example:

make flash monitor

The audio board will first connect to the Wi-Fi.
Then the board will start playing automatically.

Use Touch buttons:
Volume: Vol- Vol+
Next station: <Play>
Presset station: <Set>
Loudness ON: <mode>
Loudness OFF: <record>

Graphical part of project is based on loboris/ESP32_TFT_library https://github.com/loboris/ESP32_TFT_library