*Question* What is "Oversampling"?

[udellc]

I see in the Loom3 Serial monitor printout some standard output for SmartRock, but I see something strange I'd like explained.
Here is original printout with the unexplained output broken out below:
Initialized Serial!

= = = = = Parse Config = = = = =

Config Pretty Version:
{
"general": {
"name": "SMv3b",
"instance": 33
},
"components": [
{
"name": "ADS1115",
"params": "default"
},
{
"name": "SD",
"params": [
true,
1000,
10,
"data",
true
]
},
{
"name": "DS3231",
"params": [
10,
true,
true
]
},
{
"name": "InterruptManager",
"params": "default"
},
{
"name": "SleepManager",
"params": [
true,
false,
1
]
},
{
"name": "MS5803",
"params": [
119
]
}
]
}
SIZE: 731
= = = = = Generate Objects = = = = =

[SMv3b] Adding Module: ADS1115
[SD] Using filename: data070.csv
[SD] Initialize sucessful
[SMv3b] Adding Module: SD
[DS3231] Current Time (before possible reset)
[DS3231] Time: 2022/6/21 0:54:38
[DS3231] Time: 2022/6/21 0:54:38
[DS3231] Clearing DS3231 alarms
[SMv3b] Adding Module: DS3231
[SMv3b] Adding Module: InterruptManager
[SMv3b] Adding Module: SleepManager
Oversampling setting: 512
C0 = 136
C1 = 37792
C2 = 34813
C3 = 24229
C4 = 23504
C5 = 35067
C6 = 28338
C7 = 58688
p_crc: 64
n_crc: 0
[MS5803_0] Initialize sucessful
[SMv3b] Adding Module: MS5803_0
= = = = = = = = = = = = = = = = =

[SMv3b] Config:
Device Name : SMv3b
Instance Number : 33
Device Type : Node
Interval : 1000
[SMv3b] Modules:
[+] ADS1115
[+] SD
[+] DS3231
[+] InterruptManager
[+] SleepManager
[+] MS5803_0
File is good
{
"seconds": 20,
"minutes": 0,
"hours": 0,
"days": 0
}[InterruptManager] Registering ISR on pin 12 to be triggered on 0 and is immediate

** Setup Complete **
[SMv3b] Json:
{
"type": "data",
"id": {
"name": "SMv3b",
"instance": 33
},
"contents": [
{
"module": "Packet",
"data": {
"Number": 1
}
},
{
"module": "ADS1115",
"data": {
"analog0": 13595,
"analog1": 774,
"analog2": 3147,
"analog3": 3152
}
},
{
"module": "LocalTime",
"data": {
"Date": "2022/06/20",
"Time": "17:54:38",
"TimeZone": "PDT"
}
},
{
"module": "MS5803_0",
"data": {
"pressure": 1015.57,
"temp": 23.01
}
}
],
"timestamp": {
"date": "2022/06/21",
"time": "00:54:38"
}
}
[SD] Writing to: data070.csv
[SD] Done writing to SD
[InterruptManager] Will set alarm for : 2022/6/21 0:54:58

Entering STANDBY

==================

What is this?
Oversampling setting: 512
C0 = 136
C1 = 37792
C2 = 34813
C3 = 24229
C4 = 23504
C5 = 35067
C6 = 28338
C7 = 58688
p_crc: 64
n_crc: 0

[udellc]

This is from the MS5803 standard library MS5803_02.cpp code. Function to check the CRC value