OPEnSLab-OSU/Loom

Issues

• MongoDB Time format issue when using Loom Local Time

  #203 opened 2 years ago by udellc
  0

• MQTT Changes Topic Name to "Errors" After Hard Fault

  #200 opened 2 years ago by udellc
  2

• WeatherChimes Project SD Hard Faults

  #199 opened 2 years ago by udellc
  3

• *Question* What is "Oversampling"?

  #202 opened 2 years ago by udellc
  1

• SmartRock Loom3 Tests: Jace

  #195 opened 2 years ago by udellc
  1

• Pulling time from Manager for behavior customization uses UTC, should use Local

  #196 opened 2 years ago by udellc
  0

• Loom doesn't set time until after sample period

  #194 opened 2 years ago by BGoto808
  9

• BatchSD not publishing to Google Sheets

  #170 opened 3 years ago by BGoto808
  3

• Add ability to read serial number from board to be used as unique identifier

  #181 opened 2 years ago by kurtjd
  3

• [Loom 3] Adalogger Featherwing RTC (PCF8523) does not remember initialization

  #188 opened 2 years ago by kurtjd
  1

• Investigate why you can't go into deep sleep with Arduino (disconnect WiFi) when using WiFi MQTT Connectivity.

  #186 opened 2 years ago by udellc
  2

• Compounding lag in sample period

  #192 opened 2 years ago by udellc
  0

• MQTT Publish Plat

  #176 opened 2 years ago by WL-Richards
  1

• Timestamp issue with Hypnos

  #182 opened 2 years ago by garysekhon09
  0

• Communication error after changing RadioHead address to NodeID on LoRa

  #180 opened 2 years ago by SmithJar-rov
  0

• Investigate the MMA Accelerometer interrupt issue. Works in Slide Sentinel but not in Loom. Jared

  #179 opened 2 years ago by udellc
  0

• K30 I2C Interface

  #172 opened 3 years ago by winniiew
  1

• Default Hypnos pins are incorrect for V3.3

  #177 opened 2 years ago by colinhalebrown
  2

• Arduino IDE Library Unsearchable

  #178 opened 2 years ago by DexterCarpenter
  1

• Running out of FLASH with only WiFi and Sensors enabled

  #175 opened 2 years ago by WL-Richards
  0

• Get Will Loom Wattson Kit for Loom3 Testing

  #173 opened 2 years ago by udellc
  1

• Test Loom_MB1232 - Winnie

  #168 opened 2 years ago by BGoto808
  4

• Analog Module Measuring Voltage

  #156 opened 2 years ago by BGoto808
  1

• Jared to solve 30 char bottleneck issue with Radiohead

  #174 opened 2 years ago by SmithJar-rov
  1

• Test SDI 12 (METER Teros, etc) sensors

  #169 opened 3 years ago by udellc
  0

• Test Loom_K30 - Winnie

  #167 opened 3 years ago by winniiew
  5

• Have Serial Monitor work after waking up from sleep

  #171 opened 3 years ago by rcpeene
  0

• Test Loom_AS7265X - Winnie

  #166 opened 3 years ago by winniiew
  3

• Test Loom_AS7263 - Winnie

  #165 opened 3 years ago by winniiew
  3

• Add the documentation for implementing the compiler into the board profile

  #144 opened 3 years ago by lucasballr
  0

• Update pin assignments page to reflect Hypnos update

  #162 opened 3 years ago by udellc
  0

• Test Loom_STEMMA - Winnie

  #154 opened 3 years ago by winniiew
  5

• Test Loom_LIS3DH - Winnie

  #164 opened 3 years ago by winniiew
  2

• Test Loom_nRF - Winnie

  #155 opened 3 years ago by winniiew
  17

• SD not initializing after waking up from sleep

  #143 opened 3 years ago by BGoto808
  1

• Test Loom_TSL2561 - Winnie

  #160 opened 3 years ago by winniiew
  4

• Test Loom_MAX31856 - Winnie

  #161 opened 3 years ago by udellc
  2

• Test Loom_Ethernet - Lucas

  #158 opened 3 years ago by lucasballr
  10

• Hypnos failing to exit Deep Sleep with Rainsavor

  #163 opened 3 years ago by rcpeene
  5

• Test Loom 3 with LoRa Communication Module - Winnie/Carter

  #157 opened 3 years ago by winniiew
  6

• Test Loom_PCF8523

  #151 opened 3 years ago by rcpeene
  4

• Google Sheets Publishing Platform does not send Multiplexer Data

  #159 opened 3 years ago by rijdmc419
  1

• Test Loom_SD - Carter

  #147 opened 3 years ago by rcpeene
  1

• Test Loom_DS3231 - Carter

  #153 opened 3 years ago by rcpeene
  2

• Test MMA8451 Accelerometer- Carter

  #148 opened 3 years ago by rcpeene
  0

• Test Loom_Interrupt_Manager - Carter

  #146 opened 3 years ago by rcpeene
  4

• Test Loom_Multiplexer - Winnie

  #152 opened 3 years ago by winniiew
  5

• Test Loom_Neopixel - Winnie

  #149 opened 3 years ago by winniiew
  13

• Test Loom 3 with ADS1115 Temperature Sensor Module - Catherine

  #150 opened 3 years ago by hucatherine7
  0

• LoRa bandwidth setting

  #145 opened 3 years ago by BGoto808
  1