react-native-lanscan

A React Native library for scanning LAN IPs and ports to find services via device Wi-Fi

Support

This package is only supported on android devices, since I'm not much of an iOS Developer. Feel free to submit a PR of an iOS port I'll be happy to merge ! :)

Permissions

On android, this package adds another request for the android.permission.ACCESS_WIFI_STATE permission for your app in the package manifest. So no need to add the permission to your app module AndroidManifest.

General Information

This package scans the LAN network of the device via Wi-Fi and searches for hosts with services on a port range of your choosing.

Please take your precautions and check if the device is connected to the network with Wi-Fi first as this package doesn't do that for you. Use the React Native official NetInfo API.

Please keep in mind that this is a fallback method. There are more suitable ways of finding services on the local network like mDNS of the Zero-configuration standard (implementations like Avahi, Bonjour or NSD). Take a look at the awesome react-native-zeroconf package by Balthazar Gronon. But there are switches and routers that tend to block mDNS Registry and Discovery. And this is where react-native-lanscan comes in handy.

Here is how it works :

Fetches the device dhcp wifi Info.
Calculates the list of the possible IP Addresses on the network using the fetched device IP address and netmask.
Calculates the subnet broadcast IP address (e.g For the CIDR 192.168.1.100/24 that would be 192.168.1.255).
Keeps sending datagram UDP packets to the subnet broadcast IP address and the port range of your choosing, and keeps waiting for hosts on the subnet to respond for a specified timeout.
If it does not find any hosts, either there aren't any or the switch is blocking subnet broadcast packets. So if you choose to do so, the package falls back to a DeepScan.
The DeepScan consists of sending ICMP ECHO requests to the list of the possible network IPs that was calculated before. (This only works if the switch is not blocking ICMP requests. If it is, well... there isn't much we can do, is there ? :D)
Keeps sending datagram UDP packets to each connected host on the same port range and keeps waiting for replies.
Once the services are found, you can then initialize a socket connection to those services using the awesome react-native-udp package or its fork the react-native-tcp package by Andy Prock depending on your needs.

Install

npm i -S react-native-lanscan

Android

Add the following line to the bottom of your project's settings.gradle file.

project(':react-native-lanscan').projectDir = new File(settingsDir, '../node_modules/react-native-lanscan/android')
Change the include line of your project's settings.gradle to include the :react-native-lanscan project.

include ':react-native-lanscan', ':app'
Open your app's build.gradle file and add the following line to the dependencies block.

compile project(":react-native-lanscan")
In your app's MainActivity.java file, add new LANScanReactModule() to the return statement of the getPackages() function.

...
    new MainReactPackage(),
    new LANScanReactModule()
...

Then in the same file add the import statement : import com.odinvt.lanscan.LANScanReactModule;

Usage

import { LANScan } from 'react-native-lanscan';
let lanscan = new LANScan();

API

All the found hosts are returned via event emitter. You need to bind your listeners to the proper events first depending on your logic, then call the API methods.

Methods

`scan(min_port, max_port, broadcast_timeout = 500, fallback = true, icmp_timeout = 50, packet_timeout = 500)` Starts the scan for the hosts that have services in the min_port-max_port port range

This method does exactly the steps detailed in the General Information section.
min_port and max_port are included in the port range.
min_port and max_port must be within the port range 0-65535.
The broadcast_timeout (optional) parameter default : 500 specifies how much time in milliseconds the UDP broadcast messages should wait for replies.
The fallback (optional) parameter default : true tells the method to fall back to DEEPSCAN if no host replied to the UDP broadcast messages.
The icmp_timeout (optional) parameter default : 50 specifies how much time in milliseconds each ICMP ECHO request should wait for a reply from the host. Keep in mind that the hosts are on the local network so this shouldn't take more than 10 ms.
If a host replies to an ICMP ECHO request, the method starts sending UDP packets to the hosts on the min_port-max_port port range. The packet_timeout (optional) paramter default : 500 tells it how much time in milliseconds the UDP packets should wait for replies.

The Datagram UDP Sockets send a byte[4] "RNLS" message with the packets and expect a byte[6] response message with the packets like "RNLSOK". (Check out the java service example at the last section of this README).

Example :

lanscan.scan(48500, 48503, 100, true, 20, 100);

/*
starts the scan for all the hosts in the network
that have ready UDP services on the ports : 48500, 48501, 48502 or 48503
*/

`fetchInfo()` Fetches the device wifi dhcp info

Use this method if you need the system to only fetch the dhcp info without starting a scan because the scan method already calls it.
The info are returned in the info_fetched event too.

`getConnectedHosts()` Returns the hosts that successfully replied to an ICMP ECHO request

This will return an array of the connected hosts.
Be sure to only use this method if you've set the fallback parameter of the scan call to true. Otherwise, it will always return an empty array as it would've never fallen back to the deepscan.
This should be called inside end_pings or end event handlers. As it is only then when you're sure that all the connected hosts list will be available.

Example :

lanscan.on('end_pings', () => {
  let connected_hosts = lanscan.getConnectedHosts();
  // connected_hosts = ["192.168.1.10", "192.168.1.15"]
  // if 192.168.1.10 & 192.168.1.15 responded to the pings.
});
lanscan.scan(48500, 48503, 100, true, 20, 100);

`getAvailableHosts()` Returns the hosts that are available on the LAN and the ports that services are listening on on those hosts

This will return an object of the available hosts. The keys of the object are the IP addresses and the values are arrays of the ports that services are listening on, on those hosts.
This should be called inside an end event handler. As it is only then when you're sure that all the available hosts list will be available.
You can call this inside an end_broadcast event handler too but only if you set the fallback parameter of the scan call to false

Example :

lanscan.on('end', () => {
  let available_hosts = lanscan.getAvailableHosts();
})
lanscan.scan(48500, 48503, 100, true, 20, 100);

available_hosts is equal to :

{
  "192.168.1.10" : [48500, 48502, 48503],
  "192.168.1.15" : [48501],
  "192.168.1.18" : [48502, 48503],
}

if those are the hosts that have services listening on respective UDP ports. Keep in mind that those would be UDP sockets that responded to either broadcast Datagram UDP packets or host-specific Datagram UDP packets with a byte[6] message (check out the Java Service Example section at the end of this README).

`stop()` Stops all the running scan threads and cleans up the used resources on the native side

This does not clear the connectedHosts and availableHosts cached lists. If you want such behavior, you can overwrite your object with a new instance lanscan = new LANScan() (don't forget to bind your event listeners to the new object as those would've been destroyed).

Events

lanscan.on('eventName', (params...) => {
    ...
})

`start` Triggered on scan start

`stop` Triggered after stop() successfully shuts down device scan threads

`start_fetch` Triggered when it starts fetching device dhcp info

`info_fetched` Triggered when the device info are fetched

Broadcasts an object that contains the device Wi-Fi dhcp info

lanscan.on('info_fetched', (info) => {
    // do something with `info`
})

{
    ipAddress : "192.168.1.2",
    netmask : "255.255.255.0",
    gateway : "192.168.1.1",
    serverAddress : "192.168.1.1",
    dns1 : "8.8.8.8",
    dns2 : "8.8.4.4",
    hostsNumber : "256"
}

`start_broadcast` Triggered when the broadcast discovery starts before any packets are sent

`host_found` Triggered when a host is found with a service running on it

Broadcasts an object. This object has a string property named host which is the IP address of the found host, and an int property named port which is the port of the service that responded.
Broadcasts an object of the available hosts up until the current host was discovered. The keys of the object are the IP addresses and the values are arrays of the ports that services are listening on, on those hosts.
Can trigger either when a host responds to a broadcast UDP packet on a port, or when a host responds to a host-specific UDP packet that was sent to it after it was discovered by an ICMP ECHO request.
You can safely use this event to update your UI and show the current found services.

lanscan.on('host_found', (host, currentAvailableHosts) => {
   // update my UI
})
lanscan.scan(48500, 48503, 100, true, 20, 100);

host is equal to :

{
  host : "192.168.1.15",
  port : 48501
}

If the service on 192.168.1.15:48501 responded to a UDP packet.

currentAvailableHosts is equal to :

{
  "192.168.1.10" : [48500, 48502, 48503],
  "192.168.1.15" : [48501]
}

If those are the services that it found up until the event was triggered. If it finds another service on 192.168.1.15:48502, then, in another host_found event trigger, it would just add that to the ports array :

{
  "192.168.1.10" : [48500, 48502, 48503],
  "192.168.1.15" : [48501, 48502]
}

`end_broadcast` Triggered when the broadcast discovery threads finish

You can use this to call getAvailableHosts() but only if you set the fallback parameter of the scan call to false.

`start_pings` Triggered when the package starts pinging the calculated list of possible subnet IPs

This only triggers when the scan call doesn't find any hosts and the fallback parameter is set to true.

`host_found_ping` Triggered when a host responds to an ICMP ECHO request within the specified timeout

Triggers only between start_pings event and end_pings event in time.
Broadcasts a string of the IP address of the host that was found.
Broadcasts an array of the hosts that responded to ping requests up until the moment the current host was found.

lanscan.on('host_found_ping', (host, currentConnectedHosts) => {
    // host = "192.168.1.15"
    /* currentConnectedHosts = ["192.168.1.11", "192.168.1.13", "192.168.1.15"]
       if "192.168.1.11" and "192.168.1.13" already responded */
})

`end_pings` Triggered when all the pings are finished

Do not use this to call getAvailableHosts() as the threads that send and receive datagram packets may still be running when this event is triggered.

`end` Triggered when scan stops (when all threads finish)

It is always safe to use this to call getAvailableHosts() and getConnectedHosts()

`port_out_of_range_error` Triggers when the specified min_port and max_port ports are out of range

Broadcasts a string message of the error.
This error does break the execution of the whole process.

`fetch_error` Triggers when fetchInfo() of the device Wi-Fi State fails

Broadcasts a string message of the error.
This error does break the execution of the whole process.

`error` Triggers whenever an error occurs during the process

This includes port_out_of_range_error and fetch_error errors.
Broadcasts a string message of the error.
This error does break the execution of the whole process.

Java Service Example

This is an example of a service implementation that will be discovered by the react-native-lanscan package.

import java.io.IOException;
import java.net.*;

public class Receiver {

    public static void main(String[] args) {
        int port = 48500;
        new Receiver().run(port);
    }

    public void run(int port) {   
      DatagramSocket serverSocket = null;
      try {
        serverSocket = new DatagramSocket(port);
        byte[] receiveData = new byte[4];

        System.out.printf("Listening on udp:%s:%d%n",
                InetAddress.getLocalHost().getHostAddress(), port);     
        DatagramPacket receivePacket = new DatagramPacket(receiveData,
                           receiveData.length);

        while(true)
        {
              serverSocket.receive(receivePacket);
              String sentence = new String( receivePacket.getData(), 0,
                                 receivePacket.getLength() );
              System.out.println("RECEIVED: " + sentence);
              // now send acknowledgement packet back to sender     
              InetAddress IPAddress = receivePacket.getAddress();
              String sendString = "RNLSOK";
              byte[] sendData = sendString.getBytes("UTF-8");
              DatagramPacket sendPacket = new DatagramPacket(sendData, sendData.length,
                   IPAddress, receivePacket.getPort());
              serverSocket.send(sendPacket);
        }
      } catch (IOException e) {
              System.out.println(e);
      } finally {
    	  serverSocket.close();
      }
    }
}

Babel

This component uses ES6. So if you're using Webpack you should launch babel on main.js and output to main-tf.js if for some reason the npm postinstall script didn't execute.

"postinstall": "babel main.js --out-file main-tf.js"

Odinvt/react-native-lanscan

react-native-lanscan

Support

Permissions

General Information

Install

Android

Usage

API

Methods

scan(min_port, max_port, broadcast_timeout = 500, fallback = true, icmp_timeout = 50, packet_timeout = 500) Starts the scan for the hosts that have services in the min_port-max_port port range

fetchInfo() Fetches the device wifi dhcp info

getConnectedHosts() Returns the hosts that successfully replied to an ICMP ECHO request

getAvailableHosts() Returns the hosts that are available on the LAN and the ports that services are listening on on those hosts

stop() Stops all the running scan threads and cleans up the used resources on the native side

Events

start Triggered on scan start

stop Triggered after stop() successfully shuts down device scan threads

start_fetch Triggered when it starts fetching device dhcp info

info_fetched Triggered when the device info are fetched

start_broadcast Triggered when the broadcast discovery starts before any packets are sent

host_found Triggered when a host is found with a service running on it

end_broadcast Triggered when the broadcast discovery threads finish

start_pings Triggered when the package starts pinging the calculated list of possible subnet IPs

host_found_ping Triggered when a host responds to an ICMP ECHO request within the specified timeout

end_pings Triggered when all the pings are finished

end Triggered when scan stops (when all threads finish)

port_out_of_range_error Triggers when the specified min_port and max_port ports are out of range

fetch_error Triggers when fetchInfo() of the device Wi-Fi State fails

error Triggers whenever an error occurs during the process

Java Service Example

Babel

`scan(min_port, max_port, broadcast_timeout = 500, fallback = true, icmp_timeout = 50, packet_timeout = 500)` Starts the scan for the hosts that have services in the min_port-max_port port range

`fetchInfo()` Fetches the device wifi dhcp info

`getConnectedHosts()` Returns the hosts that successfully replied to an ICMP ECHO request

`getAvailableHosts()` Returns the hosts that are available on the LAN and the ports that services are listening on on those hosts

`stop()` Stops all the running scan threads and cleans up the used resources on the native side

`start` Triggered on scan start

`stop` Triggered after stop() successfully shuts down device scan threads

`start_fetch` Triggered when it starts fetching device dhcp info

`info_fetched` Triggered when the device info are fetched

`start_broadcast` Triggered when the broadcast discovery starts before any packets are sent

`host_found` Triggered when a host is found with a service running on it

`end_broadcast` Triggered when the broadcast discovery threads finish

`start_pings` Triggered when the package starts pinging the calculated list of possible subnet IPs

`host_found_ping` Triggered when a host responds to an ICMP ECHO request within the specified timeout

`end_pings` Triggered when all the pings are finished

`end` Triggered when scan stops (when all threads finish)

`port_out_of_range_error` Triggers when the specified min_port and max_port ports are out of range

`fetch_error` Triggers when fetchInfo() of the device Wi-Fi State fails

`error` Triggers whenever an error occurs during the process