CoAP

Server and Client for building and interacting with Constrained Application Protocol.

Allows using Plug and Phoenix or a standalone module.

Installation

If available in Hex, the package can be installed by adding coap to your list of dependencies in mix.exs:

def deps do
  [
    {:coap_ex, "~> 0.1.0"}
  ]
end

Documentation can be generated with ExDoc and published on HexDocs. Once published, the docs can be found at https://hexdocs.pm/coap.

Setup

Make a new router and endpoint:

defmodule MyApp.Coap.Router do
  use MyApp.Web, :router
end

defmodule MyApp.Coap.Endpoint do
  use Phoenix.Endpoint, otp_app: :my_app
  plug(MyApp.Coap.Router)
end

In phoenix config.exs:

config :my_app, MyApp.Coap.Endpoint,
  http: false, https: false, server: false,
  coap: [port: 5683]

Note: if you have control of both client and server, as in an IoT deployment, you may wish to adjust configuration for ack_timeout and processing_delay. This is allowed, but should be used with extreme caution as it exists outside the boundaries of the CoAP specification.

config :my_app, MyApp.Coap.Endpoint,
  http: false, https: false, server: false,
  coap: [port: 5683, ack_timeout: 5000, processing_delay: 4500]

In lib/my_app.ex add supervisor and listener for the endpoint:

children = [
  MyApp.Coap.Endpoint,
  {CoAP.Phoenix.Listener, [MyApp.Coap.Endpoint]}
]

Client

Simple client usage:

CoAP.Client.get("coap://localhost:5683/api/healthcheck")

Telemetry

Coap_ex emits telemetry events for data sent and received, block transfers, and other connection-releated events. To consume them, attach a handler in your app startup like so:

:telemetry.attach_many(
  "myapp-coap-ex-connection",
  [
    [:coap_ex, :connection, :block_sent],
    [:coap_ex, :connection, :block_received],
    [:coap_ex, :connection, :connection_started],
    [:coap_ex, :connection, :connection_ended],
    [:coap_ex, :connection, :data_sent],
    [:coap_ex, :connection, :data_received],
    [:coap_ex, :connection, :re_tried],
    [:coap_ex, :connection, :timed_out]
  ],
  &MyHandler.handle_event/4,
  nil
)

Each connection can be tagged when the connection is created, and this tag will be passed to the telemetry handler. This makes it possible to monitor a single connection among many connections. The tag can be any value.

To tag a client connection, pass a tag in the request options:

CoAP.Client.request(
  :con,
  method,
  url,
  request_payload,
  %{retries: retries, timeout: @wait_timeout, ack_timeout: timeout, tag: tag}
)

To tag a server connection if using Phoenix:

# in phoenix controller
CoAP.Phoenix.Conn.tag(conn, tag)

TODO:

./coap-client.sh -m put coap://127.0.0.1/resource -e data nc -l 5683 -u | xxd

message = <<0x44, 0x03, 0x31, 0xfc, 0x7b, 0x5c, 0xd3, 0xde, 0xb8, 0x72, 0x65, 0x73, 0x6f, 0x75, 0x72, 0x63, 0x65, 0x49, 0x77, 0x68, 0x6f, 0x3d, 0x77, 0x6f, 0x72, 0x6c, 0x64, 0xff, 0x70, 0x61, 0x79, 0x6c, 0x6f, 0x61, 0x64>>
CoAP.Message.decode(message)

coap_content(payload: "data") comes from using defrecord from gen_coap, right now.