OmarAbdulQadir
Sharing knowledge is the way to success. I am passionate about digital electronics and embedded systems. Check out my projects so we might learn from each other
Cairo, Egypt
Pinned Repositories
ATmega32
Apps and Drivers for ATmega32 microcontroller. This was made for educational purposes, and reporting any test results, comments, or bugs are welcomed.
Bootloader-R1
Bootloader for reprogramming ATmega32 MCU using UART - Release 1, Version 1.0
Bt-Update
This script is used to update ATmega32 over BLE using UART protocol
NTI_Grad_Project_ADAS
NTI automotive embedded systems program graduation project
STM32F401RE
Apps and Drivers for STM32F401 microcontroller. This was made for educational purposes, and reporting any test results, comments, or bugs are welcomed.
Temperature-Monitoring-System
Temperature monitoring systems using FreeRTOS, The system continuously monitors the temperature and fires an alarm if the temperature exceeded the threshold value. It has three states Idle (Temperature is less than the threshold value), Alarm (Temperature is above the threshold value and alarm is active), and Config (To edit the threshold value).
OmarAbdulQadir's Repositories
OmarAbdulQadir/ATmega32
Apps and Drivers for ATmega32 microcontroller. This was made for educational purposes, and reporting any test results, comments, or bugs are welcomed.
OmarAbdulQadir/Bootloader-R1
Bootloader for reprogramming ATmega32 MCU using UART - Release 1, Version 1.0
OmarAbdulQadir/Bt-Update
This script is used to update ATmega32 over BLE using UART protocol
OmarAbdulQadir/NTI_Grad_Project_ADAS
NTI automotive embedded systems program graduation project
OmarAbdulQadir/STM32F401RE
Apps and Drivers for STM32F401 microcontroller. This was made for educational purposes, and reporting any test results, comments, or bugs are welcomed.
OmarAbdulQadir/Temperature-Monitoring-System
Temperature monitoring systems using FreeRTOS, The system continuously monitors the temperature and fires an alarm if the temperature exceeded the threshold value. It has three states Idle (Temperature is less than the threshold value), Alarm (Temperature is above the threshold value and alarm is active), and Config (To edit the threshold value).