Oneiroi/ddosify

High-performance load testing tool, written in Golang.

Ddosify - High-performance load testing tool

         

Features

✔️ Protocol Agnostic - Currently supporting HTTP, HTTPS, HTTP/2. Other protocols are on the way.

✔️ Scenario-Based - Create your flow in a JSON file. Without a line of code!

✔️ Different Load Types - Test your system's limits across different load types.

Installation

ddosify is available via Docker, Homebrew Tap, and downloadable pre-compiled binaries from the releases page for macOS, Linux and Windows.

Docker

docker run -it --rm ddosify/ddosify

Homebrew Tap (macOS and Linux)

brew install ddosify/tap/ddosify

apk, deb, rpm packages

# For Redhat based (Fedora, CentOS, RHEL, etc.)
rpm -i https://github.com/ddosify/ddosify/releases/download/v0.1.1/ddosify_amd64.rpm

# For Debian based (Ubuntu, Linux Mint, etc.)
wget https://github.com/ddosify/ddosify/releases/download/v0.1.1/ddosify_amd64.deb
dpkg -i ddosify_amd64.deb

# For Alpine
wget https://github.com/ddosify/ddosify/releases/download/v0.1.1/ddosify_amd64.apk
apk add --allow-untrusted ddosify_amd64.apk

Using the convenience script (macOS and Linux)

• The script requires root or sudo privileges to move ddosify binary to /usr/local/bin.
• The script attempts to detect your operating system (macOS or Linux) and architecture (arm64, x86, amd64) to download the appropriate binary from the releases page.
• By default, the script installs the latest version of ddosify.
• If you have problems, check common issues
• Required packages: curl and sudo

curl -sSfL https://raw.githubusercontent.com/ddosify/ddosify/master/scripts/install.sh | sh

Go install from source (macOS, Linux, Windows)

go install -v go.ddosify.com/ddosify@latest

Easy Start

This section aims to show you how to use Ddosify without deep dive into its details easily.

1. Simple load test

    ddosify -t target_site.com
   

   The above command runs a load test with the default value that is 100 requests in 10 seconds.

2. Using some of the features

    ddosify -t target_site.com -n 1000 -d 20 -p HTTPS -m PUT -T 7 -P http://proxy_server.com:80
   

   Ddosify sends a total of 1000 PUT requests to https://target_site.com over proxy http://proxy_server.com:80 in 20 seconds with a timeout of 7 seconds per request.

3. Scenario based load test

    ddosify -config config_examples/config.json
   

   Ddosify first sends HTTP/2 POST request to https://test_site1.com/endpoint_1 using basic auth credentials test_user:12345 over proxy http://proxy_host.com:proxy_port and with a timeout of 3 seconds. Once the response is received, HTTPS GET request will be sent to https://test_site1.com/endpoint_2 along with the payload included in config_examples/payload.txt file with a timeout of 2 seconds. This flow will be repeated 20 times in 5 seconds and response will be written to stdout.

Details

You can configure your load test by the CLI options or a config file. Config file supports more features than the CLI. For example, you can't create a scenario-based load test with CLI options.

CLI Flags

ddosify [FLAG]

Flag	Description	Type	Default	Required?
-t	Target website URL. Example: https://ddosify.com	string	-	Yes
-n	Total request count	int	100	No
-d	Test duration in seconds.	int	10	No
-p	Protocol of the request. Supported protocols are HTTP, HTTPS. HTTP/2 support is only available by using a config file as described. More protocols will be added.	string	HTTPS	No
-m	Request method. Available methods for HTTP(s) are GET, POST, PUT, DELETE, UPDATE, PATCH	string	GET	No
-b	The payload of the network packet. AKA body for the HTTP.	string	-	No
-a	Basic authentication. Usage: -a username:password	string	-	No
-h	Headers of the request. You can provide multiple headers with multiple -h flag.	string	-	No
-T	Timeout of the request in seconds.	int	5	No
-P	Proxy address as host:port. -P http://user:pass@proxy_host.com:port'	string	-	No
-o	Test result output destination. Other output types will be added.	string	stdout	No
-l	Type of the load test. Ddosify supports 3 load types.	string	linear	No
-config	Config File of the load test.	string	-	No
-version	Prints version, git commit, built date (utc), go information and quit	-	-	No

Load Types

Linear

ddosify -t target_site.com -l linear

Result:

Note: If the request count is too low for the given duration, the test might be finished earlier than you expect.

Incremental

ddosify -t target_site.com -l incremental

Result:

Waved

ddosify -t target_site.com -l waved

Result:

Config File

Config file lets you use all capabilities of Ddosify.

The features you can use by config file;

• Scenario creation
• Payload from a file
• Extra connection configuration, like keep-alive enable/disable logic
• HTTP2 support

Usage;

ddosify -config <json_config_path>

There is an example config file at config_examples/config.json. This file contains all of the parameters you can use. Details of each parameter;

• request_count optional

  This is the equivalent of the -n flag. The difference is that if you have multiple steps in your scenario, this value represents the iteration count of the steps.

• load_type optional

  This is the equivalent of the -l flag.

• duration optional

  This is the equivalent of the -d flag.

• proxy optional

  This is the equivalent of the -P flag.

• output optional

  This is the equivalent of the -o flag.

• steps mandatory

  This parameter lets you create your scenario. Ddosify runs the provided steps, respectively. For the given example file step id: 2 will be executed immediately after the response of step id: 1 is received. The order of the execution is the same as the order of the steps in the config file.

  Details of each parameter for a step;

  • id mandatory

    Each step must have a unique integer id.

  • url mandatory

    This is the equivalent of the -t flag.

  • protocol optional

    This is the equivalent of the -p flag.

  • method optional

    This is the equivalent of the -m flag.

  • headers optional

    List of headers with key:value format.

  • payload optional

    This is the equivalent of the -b flag.

  • payload_file optional

    If you need a long payload, we suggest using this parameter instead of payload.

  • auth optional

    Basic authentication.

    "auth": {
        "username": "test_user",
        "password": "12345"
    }

  • others optional

    This parameter accepts dynamic key: value pairs to configure connection details of the protocol in use.

    "others": {
        "keep-alive": true,              // Default false
        "disable-compression": false,    // Default true
        "h2": true,                      // Enables HTTP/2. Default false.
        "disable-redirect": true         // Default false
    }

Common Issues

macOS Security Issue

"ddosify" can’t be opened because Apple cannot check it for malicious software.

• Open /usr/local/bin
• Right click ddosify and select Open
• Select Open
• Close the opened terminal

Communication

You can join our Discord Server for issues, feature requests, feedbacks or anything else.

More

This repository includes the single-node version of the Ddosify Loader. Ddosify Cloud will be available soon. It will support multi-location based distributed load testing and more features.

Join the waitlist: https://ddosify.com

License

Licensed under the AGPLv3: https://www.gnu.org/licenses/agpl-3.0.html