/openstim

Open Source Hardware Electrical Stimulator

Primary LanguageC++Creative Commons Attribution 4.0 InternationalCC-BY-4.0

OPEN-STIM - OPEN SOURCE HARDWARE ARDUINO BASED ELECTRICAL STIMULATOR

Licence OSHWA

FEDERAL UNIVERSITY OF SÃO JOÃO DEL-REI – UFSJ

NEUROENGINEERING AND NEUROSCIENCE INTERDISCIPLINARY LABORATORY – LINNCE

                         UFSJ         LINNCE

DEVELOPED BY:

Maikon Lorran Santos - maikon.lorran@hotmail.com
João Daniel Nolasco - joaodani@hotmail.com
Vinícius Rosa Cota: - vrcota@ufsj.edu.br

PROJECT'S GOAL

The main objective of the project was to develop and build a low-cost electrical stimulator for experimental stimulation electrophysiology based on the Arduino platform, maximizing ease of use, versatility, and openness. The idea was to develop an output stage shield capable of delivering mono or biphasic pulses with constant current (even in face of varying output impedances) easily attachable to an Arduino microcontroller board. Stimulation parameters (pulse frequency, pulse duration, number and polarity of phases) can be controlled by a touch screen and/or by knobs. In this entry, we published the version which is controlled mostly by a touch screen display, but this can be easily substituted by manual controls (switches and additional knobs) with or without a LCD display to further reduce costs (variation not yet published). These variations and openness of the design (which is provisionally certified by OSHWA with UID BR000007) makes Open Stim a very flexible stimulation platform for experienced users and, at the same time, also a ready-to-use device for researchers not skilled on electronics.

DISCLAIMER

We offer this design as is and although it has been successfully tested with care and to the best of our knowledge, we do not provide any warranty in any aspect.

STIMULATOR PARAMETERS

-Current: 15 µA up to 1200 µA
-Frequency: 0.1 Hz up to 300 Hz
-Duty Cycle: 4 µs up to 1 s
-Biphasic Pulses
-Low battery indicator

OPEN STIM

OPEN-STIM       Shield

• More about the lab, at our website: LINNce

LICENSE

Documentation licensed under the Creative Commons Attribution Share Alike 4.0 International License