Open3DV/Xema

Issues

• XEMA version:b73988d commit: 2024-05-28固件，投影亮度设置为1023采集后效果没生效，亮度图还是显示的上一个值的效果

  #49 opened 5 months ago by xqlong5121
  1

• 彩色相机使用彩色模式拍摄物体，发现物体表面有异常颜色杂色，如下图拍摄钉子物体效果

  #48 opened 5 months ago by xqlong5121
  0

• 连续采集过程切换拍照模式，可能会出现切换失败现象

  #47 opened 6 months ago by xqlong5121
  0

• 同样的led亮度，曝光时间6000和7000的亮度图没有变化

  #46 opened 7 months ago by xqlong5121
  0

• xema-s-500wbalser相机，usb传输测试（反复重启+采集）

  #37 opened 9 months ago by xqlong5121
  2

• 写入标定参数后，断电重启相机，标定文件大小都变为0，断电之前连接了GUI是有深度信息和标定参数的，建议写入标定参数后重启相机生效

  #31 opened 9 months ago by xqlong5121
  2

• 彩色相机的外参校方式正未转成蓝色通道标定，导致校正不通过

  #36 opened 9 months ago by xqlong5121
  0

• 大恒相机usb丢帧问题

  #35 opened 9 months ago by yaohaihang1
  1

• 黑色模式采集图像异常

  #28 opened 9 months ago by xqlong5121
  1

• 多网卡时，提示相机网络是否能通

  #27 opened 9 months ago by xqlong5121
  1

• 中文注释乱码

  #22 opened a year ago by Sharemon
  0

• 相机有标定参数，但深度图和高度图、点云信息都是空的

  #30 opened 10 months ago by xqlong5121
  2

• 相机反复软重启，相机出现usb2.0，GUI连接提示2D相机故障

  #34 opened 9 months ago by xqlong5121
  1

• 相机上电后出现光机iic通信异常

  #33 opened 9 months ago by xqlong5121
  7

• linux系统下C++示例运行点云信息错误

  #32 opened 9 months ago by yaohaihang1
  2

• gui输入错误相机IP时检测时间较长，容易导致gui卡死

  #29 opened 10 months ago by xqlong5121
  0

• 从高动态切到单曝光模式后，采集效果跟设定的投影亮度值不匹配

  #24 opened a year ago by xqlong5121
  0

• 【置顶】2023-12前的issue记录在 https://gitee.com/open3dv/xema/issues

  #23 opened a year ago by vic-w
  0

• The PCB production files

  #5 opened 2 years ago by rgruberski
  3