DEPRECATED.
openag_safe_shutdown
Script for safely shutting down the raspi
Software Install
Clone repo to root
cd ~
git clone
Add script to startup automaticallyby editing rc.local
sudo nano /etc/rc.local
Add line before 'exit 0'
python /home/pi/openag_safe_shutdown/safe_shutdown.py
Hardware Install
Connect RPI GPIO 11/13/15/17 plug to raspberry pi
Connect white wire to CH1 on delay relay
Program relay now, here are steps:
- Hold set to enter programming mode
- Use swi to select between digit cursors
- Use num+ / num- to increment / decrement digit
- Move through programming features (mode / t1 / t2 / nx) by quickly pressing set
- Save programming by holding set
Program relay mode = 10
Program relay t1 = 30
Program relay t2 = 5
Program relay nx = 0101
