Box/lid for
The lid will fit CamdenBoss BIM2006/16-GY/GY ABS Case Grey 190 x 110 x 60mm 2000 Series (https://www.camdenboss.com/camden-boss/bim200616-gygy-2000-series-general-purpose-abs-enclosure%2c-grey%2c-abs-ul94-hb%2c-190x110x60mm/c-23/p-15857).
Additional PCB to hold sensors:
Much better setup for sensor cutouts:
Uses:
- QR Code generator for OpenSCAD https://github.com/ridercz/OpenSCAD-QR
- https://github.com/KitWallace/openscad/blob/master/braille.scad
- https://www.thingiverse.com/thing:668210/files
- https://github.com/adafruit/Adafruit_CAD_Parts
The slots are labeled in the model. The sensors used are
- AHT20 Adafruit Qw/St: temperature, humidity
- mcp9808 Adafruit, headers only: temperature
- AMB2301 Wired sensor: temperature, humidity
- SHT45 Adafruit Qw/St: temperature, humidity
- BH1750 Adafruit Qw/St: Luminance
- BH1745 Pimoroni Garden: Luminance, colour
- LTR 559 Pimoroni Garden: Luminance, proximity (~5cm)
- I2S MEMS Adafruit, headers only: sound
The code is fairly modular.