OpenEarable/open-earable

Issues

• update readme based on 1.4.0 version

  #84 opened 4 months ago by TobiasRoeddiger
  0

• Audio recording failed with empty files

  #82 opened 6 months ago by Qiangest
  1

• Bluetooth sensor data

  #81 opened 8 months ago by knightron0
  4

• Unable to detect SD card

  #80 opened 8 months ago by Oscar-Chung-CKL
  2

• add information to flash bootloader

  #77 opened 9 months ago by TobiasRoeddiger
  0

• unit of sensors incorrect

  #78 opened a year ago by TobiasRoeddiger
  1

• antialiasing filter for tone generator (e.g. polyBLEP)

  #52 opened 9 months ago by kuettner97
  1

• support buffer reallocation with different block size when changing sample rate

  #53 opened 9 months ago by kuettner97
  0

• interrupt-based sensor logging

  #61 opened 9 months ago by TobiasRoeddiger
  0

• implement sensor data logging on sd

  #59 opened 9 months ago by kuettner97
  0

• add sketch that tests all features step by step to verify earable works

  #73 opened 9 months ago by TobiasRoeddiger
  0

• burning the bootloader

  #79 opened 9 months ago by Oscar-Chung-CKL
  1

• Burning bootloader

  #75 opened a year ago by knightron0
  13

• Open wearable board cannot be detected by laptop and Arduino IDE

  #76 opened a year ago by Oscar-Chung-CKL
  1

• Replacing ARDUINO_NANO33BLE folder in variants step is missing in 1.3.0 readme

  #66 opened a year ago by o-bagge
  0

• Arduino Mbed OS Nano Boards should be clarified

  #69 opened a year ago by TobiasRoeddiger
  0

• clarify that installing edge-ml will install some of the libs

  #71 opened a year ago by TobiasRoeddiger
  0

• wire is currently in the spi section of the readme

  #65 opened a year ago by TobiasRoeddiger
  0

• sometims clicking noises occur when recording at high samplring rate and streaming sensor data

  #55 opened a year ago by TobiasRoeddiger
  3

• release edge-ml 1.3.3

  #70 opened a year ago by TobiasRoeddiger
  0

• update readme

  #39 opened a year ago by TobiasRoeddiger
  3

• which units should we use for the different sensors?

  #34 opened a year ago by TobiasRoeddiger
  2

• click jingle plays repeatedly

  #62 opened a year ago by kuettner97
  0

• "play" paused wav file with same name string should continue playback

  #30 opened a year ago by ilteen
  2

• change audio player state (also BLE) on file end

  #54 opened a year ago by kuettner97
  1

• update Device Info Service according to gatt standard

  #45 opened a year ago by TobiasRoeddiger
  2

• update to edge-ml 1.3.2

  #38 opened a year ago by TobiasRoeddiger
  1

• fix axis of the imu

  #32 opened a year ago by TobiasRoeddiger
  1

• battery state and level improvements

  #47 opened a year ago by TobiasRoeddiger
  0

• how do we encode the button state as sensor?

  #35 opened a year ago by TobiasRoeddiger
  3

• remove Config file folder

  #58 opened a year ago by TobiasRoeddiger
  0

• sd card reader issues on macOS

  #56 opened a year ago by TobiasRoeddiger
  1

• ideas for later

  #26 opened a year ago by TobiasRoeddiger
  0

• check if docs correctly reference adafruit sdfat fork esp. for the sdfat changes description

  #28 opened a year ago by TobiasRoeddiger
  0

• reimplement serial mic transmission

  #50 opened a year ago by kuettner97
  2

• Close SDManager on Card removal

  #49 opened a year ago by kuettner97
  0

• check wav file format of files

  #51 opened a year ago by kuettner97
  0

• create fork of the sdfat lib to get rid of having to do the changes

  #25 opened a year ago by TobiasRoeddiger
  0

• compile custom bootloader to fix the name

  #40 opened a year ago by TobiasRoeddiger
  1

• make sure firmware works without sd card

  #46 opened a year ago by TobiasRoeddiger
  0

• stop all sensors on disconnect

  #37 opened a year ago by TobiasRoeddiger
  0

• file name for recordings

  #41 opened a year ago by TobiasRoeddiger
  0

• add read to LED characteristic

  #44 opened a year ago by TobiasRoeddiger
  0

• setting sensor config for the imu and then the pressure/temp sensor does not work

  #43 opened a year ago by TobiasRoeddiger
  0

• update library.properties file

  #31 opened a year ago by TobiasRoeddiger
  0

• update the examples/App to use open_earable and OpenEarable.h

  #42 opened a year ago by TobiasRoeddiger
  0

• add charging state characteristic

  #33 opened a year ago by TobiasRoeddiger
  2

• change name from "Earable-XXXX" to "OpenEarable-XXXX"

  #36 opened a year ago by TobiasRoeddiger
  1

• the button should be a sensor and not its own characteristic

  #27 opened a year ago by TobiasRoeddiger
  0

• Wrong units from sensors

  #29 opened a year ago by o-bagge
  0