Pinned issues
Issues
- 2
- 1
ipctool segfaults on xm510
#126 opened by nickoe - 9
Collecting information about SigmaStar devices
#18 opened by ZigFisher - 1
i2cdetect output corrupted on last line
#122 opened by RoboSchmied - 4
gpio scan issue
#103 opened by bedenko - 1
ipctool doesn't create any output
#111 opened by lilithebowman - 1
[ipctool spidetect] always calls i2cdetect
#117 opened by RoboSchmied - 0
i2cdetect skips last address (0xff)
#115 opened by RoboSchmied - 1
Incorrect CV300+IMX290 on SPI detection
#15 opened by widgetii - 0
i2cdump does not show last register byte
#113 opened by RoboSchmied - 6
[Same Chip ID] 3 sensors are not distinguished
#112 opened by RoboSchmied - 1
- 8
ipctool collects complete firmware dumps without the user's knowledge or approval
#78 opened by gckzl - 2
Could not start ipctool on original firmware
#77 opened by a-baturin - 0
GPIO scan use instructions?
#76 opened by LsrSal - 1
'Segmentation fault' using telnet_upload.py
#74 opened by ThinkPadNL - 1
Alternative method to upload binary
#38 opened by DSchndr - 1
Problem with GK7205V210 chip detection
#73 opened by ZigFisher - 8
gc1024 is not detected
#52 opened by moleus - 6
run ipctool on Goke GK7205V300
#44 opened by JeromeDuboisVizzia - 0
Longse additional info
#43 opened by widgetii - 3
tftp as alternative method and new T10 camera
#30 opened by brainstorm - 14
Upgrade / Restore fails on Videopark devices
#37 opened by DSchndr - 4
Run ipctool from SD card
#36 opened by NathanBxer - 1
ipctool-mips32 trace not working as expected
#31 opened by brainstorm - 1
IMX347 detected as IMX335
#28 opened by ch999dev - 1
Binary release connects to AWS?
#27 opened by roger- - 2
Incorrect sensor detection on two test cameras
#14 opened by widgetii - 2
- 1
- 1
Please add an additional key of unconditional consent to restore from the image
#20 opened by ZigFisher - 5
Error: unexpected value for SmartSens == 0x1145
#16 opened by phpcoder - 6
xm530: No sensor detected
#13 opened by kodidu - 1
- 1
- 0
Please fix report if command line added. TNX !
#10 opened by ZigFisher - 0
Wrong chip detection for IPG-80HE20PS-S
#9 opened by widgetii - 2
- 2
- 2
Bad output on 3518?v100
#6 opened by widgetii - 2
- 1
Сообщение об инициализации
#4 opened by ZigFisher - 5
- 1
Отображение разделов MTD
#2 opened by ZigFisher - 0