OpenRepeater Project
Project to develop a low cost, low power, but a feature rich duplex Linux repeater controller.
Pinned Repositories
documents
This is the main repository for the OpenRepeater Project where WIKIs and Issues live.
hardware
This is where hardware related files live for the OpenRepeater Project like Eagle CAD files for the Raspberry Pi and Beaglebone Black.
MODULE_Free_Radio_Network
MODULE_Remote_Relay
Remote Relay Module for OpenRepeater to drive up to 8 relays by DTMF Code
MODULE_Rig_Control
DTMF to rigctl commands module to allow CAT control of supported radios.
openrepeater
This is where web application files live for the OpenRepeater Project. The OpenRepeater web application is a front end interface to the svxlink core system and builds the appropriate configuration files needed for operation.
orp-sounds
Sounds required by OpenRepeater for SVXLink core and modules.
scripts
Misc scripts live here like system build scripts. This is a Work-In-Progress...
svxlink-sounds-en_US-laura
new svxlink us sound files
SVXLinkWrapperORP
Experimental wrapper for SVXLink to provide additional functionally based upon SvxLinkWrapper by guysoft and customized for intergration with the OpenRepeater project.
OpenRepeater Project's Repositories
OpenRepeater/openrepeater
This is where web application files live for the OpenRepeater Project. The OpenRepeater web application is a front end interface to the svxlink core system and builds the appropriate configuration files needed for operation.
OpenRepeater/documents
This is the main repository for the OpenRepeater Project where WIKIs and Issues live.
OpenRepeater/hardware
This is where hardware related files live for the OpenRepeater Project like Eagle CAD files for the Raspberry Pi and Beaglebone Black.
OpenRepeater/scripts
Misc scripts live here like system build scripts. This is a Work-In-Progress...
OpenRepeater/MODULE_Remote_Relay
Remote Relay Module for OpenRepeater to drive up to 8 relays by DTMF Code
OpenRepeater/svxlink-sounds-en_US-laura
new svxlink us sound files
OpenRepeater/orp-sounds
Sounds required by OpenRepeater for SVXLink core and modules.
OpenRepeater/SVXLinkWrapperORP
Experimental wrapper for SVXLink to provide additional functionally based upon SvxLinkWrapper by guysoft and customized for intergration with the OpenRepeater project.
OpenRepeater/MODULE_Free_Radio_Network
OpenRepeater/MODULE_Rig_Control
DTMF to rigctl commands module to allow CAT control of supported radios.
OpenRepeater/MODULE_Metar_Info
The metar information module is used to get METAR (weather) information from ICAO locations, usually airports, and announces them over the air. You can request a METAR from an airport of your interest.
OpenRepeater/MODULE_ORPVoiceMail
OpenRepeater/MODULE_SiteStatus
OpenRepeater/MODULE_TxFan
This in OpenRepeater module that allows control of a cooling fan or other device via a GPIO pin. It follows the PTT activity or comes on after a delay.
OpenRepeater/svxlink-sample-configs
The purpose of this repo is to store sample SVXLink config files for the purpose of either using in advanced mode in ORP or as a basis to build new front end logic from.