Various DIN rail mounts for Voron components.
- M3x5x4 heatset inserts
- M3x6 button head screws
- Self-tapping M2x10 screws for Trident/v2.4r2 PCB DIN clip mounts
- Voron PCB DIN clip
- SSR DIN Rail mount (can be found at various Voron vendors like Fabreeko, KB-3D, West3D, etc.)
Modified standard SKR Mini E3 from Voron V0 repo to use current Trident and v2.4r2 PCB DIN clips and M3 heatset inserts.
Modified SKR Mini E3 mount from V0 to use with a SSR DIN mount. I recommend this mount instead of the regular DIN rail mount if you are mounting the MCU on a vertical DIN rail.
Based on timmit99's Klipper_Expander mount. Uses Trident/v2.4 PCB DIN rail clip and M3 inserts.
Modified from on timmit99's original Klipper_Expander mount. Changes include mounting holes to fit Trident and v2.4r2 PCB DIN clips. Also has been modified to use standard voron M3 heatset inserts.
Adapted from https://www.thingiverse.com/thing:5222787. Recommended if mounting the RPi on a vertical DIN rail. Uses M3 heatset inserts.
WARNING: Raspberry Pi's typically use M2.5 screws for mounting. I carefully enlarged the mounting holes on my Rpi with an M3 reamer. A 1/8 inch drill bit can be used, however I recommend getting an M3 reamer for the job.