This repo contains a simplified subset of the git tools used by All Around the World for our software development. It makes it dead easy for teams using git (and in our case, github) to work together.

There are only three new commands to remember:

git refresh (rebase your work on top of the current default branch)
git pushback (pushes your changes to origin)
git done (cleanly add your branch back to the default branch)

There are optional git-hub and git-lab commands available:

git hub $issue_number (optional. create new branch based on a github ticket)
git lab $issue_number (optional. create new branch based on a gitlab ticket)

The bin/git-hub command assumes you're using github and the bin/git-lab command asumes you're using gitlab. The other commands work fine without it.

The bin/git-lab and bin/git-hub commands require config files. The bin/git-lab config file is documented via perldoc bin/git-lab. The bin/git-hub config file is documented below.

Assumptions

The default branch (usually main or master) is never worked on directly.

We derive the default branch via:

basename $( git symbolic-ref refs/remotes/origin/HEAD )

If you get the error, ref refs/remotes/origin/HEAD is not a symbolic ref, you can fix it with this:

 git symbolic-ref refs/remotes/origin/HEAD refs/remotes/origin/$branch_name

Where $branch_name is the name of the primary branch you develop from (main, master, etc.).

Instead, new branches are created (usually for an individual ticket or change request), we hack, we regularly pull new changes into that branch, and after a pull request is created and approved, we merge the code back into the default branch.

The examples below assume the files in the bin/ directory are in your path. If they are not in your path, you have to type the commands explicitly:

bin/git-hub 5738   # don't use if you don't use github
bin/git-refresh
bin/git-pushback
bin/git-done

The Commands

Checking Out a Branch

We recommend all work being done on a new branch that is not the "primary" branch. Thus, from your primary branch:

git checkout -b my-shiny-new-branch

Optionally, if you are using github, we assume that branches are usually per ticket. You can manually create a branch, but we tend not to. Instead, if you have been assigned (or taken) github issue 5738, with the title "Rework reputation to handle faction conflict", you run the following command:

git hub 5738

And you're in a shiny new branch named rework-reputation-to-handle-faction-conflict-5738.

If that branch already exists, it's checked out.

This command is not required. Instead, create your own version if you need it. If you do want it, this command, see Config File below.

Refreshing Your Branch

It's often the case that you want to pull in the latest default branch to keep your code up-to-date. Working on a change for a week with a fast-moving codebase can cause serious headaches when it's time to merge. Thus, you should regularly run the following in your branch (I try to run it at least once per day):

git refresh

Regardless of the branch you are on, this code:

Checks out master
Does a fast-forward merge
Checks out your branch (if branch is not master)
Rebases onto the default branch (if branch is not already the default branch)

In other words, it cleanly rebases your code on top of the target branch.

If you have uncommitted changes, git refresh will print an error an exit. If you pass --stash (or -s), it will stash your changes, run the commands, and then pop your changes. However, this means that if you have a rebase conflict, you will have stashed changes you will need to remember to pop off the stash.

Pushing back to origin

For many workflows, you will need to create a pull request (or merge request, if you're using gitlab). The easiest way to ensure that origin always has the latest changes is to use:

git pushback

That only works on branches. It's equivalent to:

git push --set-upstream origin your-branch-name

If you must force the push, use --force. Internally, we use --force-with-leaase which will overwrite the remote changes, but only if no one else has pushed changes there.

git pushback -f
# or
git pushback --force

Merging into the default branch

For many companies, a typical git history graph looks like a plate of spaghetti someone's just unswallowed onto your monitor. This makes it very hard to dig through your git history, to follow changes, or use tools like git-bisect. For us, we simply run:

git done

And that will cleanly update the default branch and rebase your branch on top of it, and push that change to your origin.

With that, you get a clean git history like this:

| * 44eba1b094 - ...
| * 217350810f - ...
|/
*   c84e694e59 - Merge branch 'no-add-message-from-context-object-8615' PR#8622 (6 days ago)  <some author>
|\
| * 9d73143f75 - ...
| * 983a1a5020 - ...
| * e799ecc8e3 - ...
| * aa9c981c2e - ...
| * 4651830fd6 - ...
|/
*   010e94b446 - Merge branch 'fix-test-combat-module-usage' PR#8623 (7 days ago)  <some author>
|\
| * 46d8917af7 - ...
|/
*   4acfdd8309 - Merge branch 'economy-action-use-args-hashref' PR#8617 (10 days ago)  <some author>
|\
| * a1f863f908 - ...
| * b3dc3efb2a - ...
| * ab77373fca - ...
| * b5491e4ae9 - ...

And when you're done, it will also print out the instructions on how you can delete your local and remote copies of the branch, to help you be nice and not leave branches cluttering up the repository.

Config File

If you use the git hub command, it requires that the current directory have a .git-hub file in the following format:

user   Ovid
repo   git-workflow
token  <personal access token>

See the github documentation for creating a personal access token.

We strongly recommend that you get a "read-only" token for use with this. If it had more privileges, falling into the wrong hands might be a security hole.

If you do not use the bin/git-hub tool, you do not need a config file.

Caveats

These caveat's only apply to bin/git-hub.

The new branch that is created is based on the branch you're on, so you probably want to run this from the default branch
Branch detection is based on a heuristic, using the ticket number. If you have more than one branch with that ticket number, you will get a warning and the code will exit.
You'll need a config file for this. See perldoc bin/git-hub for this. There is a git-hub-config-example file included that you can rename to .git-hub.
Assumes Perl 5 version 8
If the ticket title has non-ASCII characters, you must have Text::Unidecode installed with Perl.
jq must be installed if you use the git-hub script (https://stedolan.github.io/jq/)

Changes

2021-10-28

- `git-refresh` no longer automaticallys stashes uncommitted
  changes. It was a great feature, but it turns out it's an
  anti-feature for those new to `git`. If there was a rebase
  conflict, they'd lose their changes because they would forget
  to run `git stash pop` after.

- We now automatically detect the main branch you should be
  branching off of, refreshing from, and pushing back to. 
  Only `bin/git-hub` requires a config file now.

2021-10-24

- `git done` used to be called `git merge-with-master`, but with so
  many projects having a different "source" branch name,
  `merge-with-master` does not make sense any more. `git done`
  behaves exactly the same as `merge-with-master`, but uses the
  correct target branch.

License

This project is licensed under the terms of the MIT license.

ACKNOWLEDGEMENTS

The following have added several valuable suggestions to this project.

Peter Mottram
Noel Maddy
Branislav Zahradník

Ovid/git-workflow