OxMarco/Micro-GSM-Network

Basic 2G sms and voice calls with a LimeNET Micro v2.1 and the osmocom nitb stack

Micro GSM Network

Description

This project aims to use the LimeNET Micro Software Defined Radio to set up a public GSM network using Yate and YateBTS. The rationale for this project was to study and experiment mobile communications and the GSM protocol with a low-end device. It creates simple and basic GSM network for SMS and voice calls running on a LimeNET Micro with a Raspberry Pi CM3 board flashed with Ubuntu 20.04 LTS.

Table of Contents

• Description
• Installation
• Usage
• Troubleshooting
• Contributing
• License
• Acknowledgments

Installation

Hardware Requirements

• LimeNET Micro SDR
• Antennas for 900MHz (EMEA GSM-900 band)
• Raspberry Pi compute module 3

Software Requirements

• Yate
• YateBTS
• LimeUtil

Steps

1. Clone the Repository:

   git clone https://github.com/OxMarco/Micro-GSM-Network.git
   

2. Install Dependencies:

   sudo apt-get update
   sudo apt-get install yate yatebts
   

3. Run Setup Script:

   ./setup.sh
   

Usage

1. Init the Lime toolkit software:

   LimeUtil --update
   

2. Run scripts: Run the .sh scripts one by one to initialise the GSM stack.

License

This project is licensed under the MIT License - see the LICENSE.md file for details.