A SOCKS5 load balancing proxy to combine multiple internet connections into one.
It can also be used as a transparent proxy to load balance multiple SSH tunnels.
Written in pure Go with no additional dependencies.
Works on Windows, Darwin and Linux.
The idea for this project came from go-dispatch-proxy which is written in Go.
I needed something advanced, secure, fast, stable, portable and light, preferably a single binary that is independent by location without polluting the entire drive and without security or stability issues.
The slave branch is for testers who want to try prototype features and optimizations.
The update is in progress, check the slave branch to see what new will be.
Up to date.
No installation required.
Just grab the latest binary for your platform from the releases and rename it DisPro.exe or DisPro.bin if you are not on Windows then start speeding up your internet connection.
For -option on Windows will require the Privoxy software and this can be downloaded from release and make sure it is listening on IP ::1 and port 8118.
If you want to use cmd.exe on Windows this will require the powershell.exe to be already installed for fixing text colors but the program can work without it if you don't want text colors anymore.
This program can be used with launcher.cmd for insane speed and workaround of any bugs on Windows.
DisPro now supports Linux in both modes, normal and tunnel.
On Linux normal mode, DisPro uses the SOL_SOCKET and SO_BINDTODEVICE from syscall package to bind the interface corresponding to the load balancer IP addresses.
As a result, the binary must be run with necessary capabilities and with admin or root privilege.
The adaptive MTU changing is automaticaly and increases or decreases for each load balancer address, this function is named as Jumbo in program, these changes are not permanent and will be reset them to the default ones when you restart or reboot but not when you hibernate or sleep your computer, im not sure about shotdown.
The -secure is smarter now that means if a website or address support to be forwarded on secure port that will use it, if is not supported that will be on unsecure port for the website or address to can be accessed.
The option -try is removed on new updates because now is automatic and is essential to be always enabled for preventing the issues if an load balancer have some troubles or if is down.
For to bypass the Windows and Linux conflicts, the following commands will be automaticaly executed.
On Windows will be.
cmd.exe /c wmic.exe process where 'name='DisPro.exe'' call setpriority realtime
cmd.exe /c net.exe stop /y RemoteAccess
cmd.exe /c netsh.exe interface ipv6 set interface 1 forwarding=enabled advertise=disabled metric=1 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
cmd.exe /c netsh.exe interface ipv6 set subinterface interface=1 mtu=(Adaptive MTU) store=active
cmd.exe /c netsh.exe interface ipv6 set address interface=1 type=anycast store=active
cmd.exe /c netsh.exe interface ipv6 set address interface=1 address=::1 type=unicast validlifetime=infinite preferredlifetime=infinite store=active
cmd.exe /c netsh.exe interface ipv4 set interface 1 forwarding=enabled advertise=disabled metric=1 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
cmd.exe /c netsh.exe interface ipv4 set subinterface interface=1 mtu=(Adaptive MTU) store=active
cmd.exe /c netsh.exe interface ipv4 set address name=1 source=dhcp type=anycast store=active
cmd.exe /c netsh.exe interface ipv4 set address name=1 source=static address=127.0.0.1 mask=255.255.255.255 gwmetric=1 type=unicast store=active
On Linux will be.
sh -c chmod --verbose 0755 ./DisPro.bin
sh -c chown -c root:daemon ./DisPro.bin
sh -c setcap cap_net_admin,cap_net_raw=eip ./DisPro.bin
sh -c ifconfig -a lo add 127.0.0.1 netmask 255.255.255.255 mtu (Adaptive MTU) arp allmulti multicast dynamic up
sh -c sysctl --write net.ipv4.conf.all.rp_filter=0
Tunnel mode doesn't require admin or root privilege.
Ignore the -option for Darwin, it will do nothing.
On Windows will be.
:: One.
netsh.exe interface ipv6 set interface %index_one% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv6 set subinterface interface=%index_one% mtu=1500 store=active
netsh.exe interface ipv4 set interface %index_one% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv4 set subinterface interface=%index_one% mtu=1500 store=active
:: Two.
netsh.exe interface ipv6 set interface %index_two% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv6 set subinterface interface=%index_two% mtu=1500 store=active
netsh.exe interface ipv4 set interface %index_two% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv4 set subinterface interface=%index_two% mtu=1500 store=active
:: Three.
netsh.exe interface ipv6 set interface %index_three% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv6 set subinterface interface=%index_three% mtu=1500 store=active
netsh.exe interface ipv4 set interface %index_three% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv4 set subinterface interface=%index_three% mtu=1500 store=active
:: Four.
netsh.exe interface ipv6 set interface %index_four% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv6 set subinterface interface=%index_four% mtu=1500 store=active
netsh.exe interface ipv4 set interface %index_four% forwarding=disabled advertise=disabled metric=2 ignoredefaultroutes=disabled advertisedefaultroute=disabled store=active ecncapability=application
netsh.exe interface ipv4 set subinterface interface=%index_four% mtu=1500 store=active
The rest of code is not important to be listed here.
The -option and launcher.cmd will change the operating system settings and some of these can be permanent but can be reset them to the default values manually if you know them.
For Windows the settings will be these.
https://github.com/SirSAC/DisPro/blob/master/windows.go#L63-L80
Changing the DNS servers from the launcher.cmd will modify the system settings for each selected internet adapters.
For Linux the settings will be these.
https://github.com/SirSAC/DisPro/blob/master/linux.go#L83
https://github.com/SirSAC/DisPro/blame/master/readme.md#L21
For Windows use in front of binary name.
.\
For Darwin and Linux use in front of binary name.
./
DisPro.(exe/bin) -help
Will show this.
Usage of C:\Users\SirSAC\Downloads\DisPro.(exe/bin):
-host string
The IP address to listen for SOCKS connection (default "::1")
-keep
Use keep mode (sets whether the program should keep the connection alive even if it is done)
-list
Shows the available addresses for dispatching (non-tunneling mode only)
-multiply int
The threads are multiplied by the specific value (default 2)
-option
Use option mode (sets the operating system options for maximum potential)
-pipe int
The size of buffers in bytes for more throughput (default 8192)
-port int
The port number to listen for SOCKS connection (default 1080)
-secure
Use secure mode (acts like using secure ports than usual ones)
-serial
Use serial mode (acts to serialize access to function get load balancer)
-tunnel
Use tunnel mode (acts as a transparent load balancing proxy)
PS C:\Users\SirSAC\Downloads>
DisPro.(exe/bin) -list
Will show like this.
2021/03/21 17:15:31 [-] Listing the available addresses for dispatching
2021/03/21 17:15:31 [+] 1, IP: fe80::e464:1874:c2d3:ec5
2021/03/21 17:15:31 [+] 1, IP: 192.168.1.2
2021/03/21 17:15:31 [+] 2, IP: fe80::4843:2f14:2f6a:81a8
2021/03/21 17:15:31 [+] 2, IP: 192.168.43.4
PS C:\Users\SirSAC\Downloads>
The example 1.
DisPro.(exe/bin) -host ::1 -port 1080 -multiply 2 -pipe 8192 -option -secure -delay -keep -serial 192.168.1.2 192.168.43.4@1
The example 2.
DisPro.(exe/bin) -host 127.0.0.1 -port 8080 -multiply 1 -pipe 4096 -tunnel -option -delay -keep -serial 127.0.0.1:443 127.0.0.1:80@2
Please do not use the examples, is just informative.
- go-dispatch-proxy: A SOCKS5 load balancing proxy to combine multiple internet connections into one.
- dispatch-proxy: A SOCKS5/HTTP proxy that balances traffic between multiple internet connections.
Conduct under the Contributor Covenant Code of Conduct.
Licensed under the BSD 3-Clause "New" or "Revised" License.