ioBroker HomeKit Adapter

HomeKit Adapter for ioBroker

With this Adapter it is possible to use your iOS Device native for ioBroker Home Automation.

Within Admin Settings you can set following Attributes

username
port
pincode
bridge name

Installation

Enums are no longer needed, Objects were included cause of ioBroker roles.

Note: on some systems additional package is required sudo apt-get install libavahi-compat-libdnssd-dev

(For Usage you must define a enum named enum.homekit. There you must include all needed Objects. Set a common Name for all Objects e.g. hm-rpc.0.JEQ0225305.1.TEMPERATURE = Kinderzimmer)

You can use every Homekit App on iOS. These Version is tested with Elgato Eve cause it's free.

Currently implemented are:

Homematic Thermostat
Homematic Switch
zWave Temperature
zWave Switch

Supported Roles from ioBroker:

value.temperature
indicator.battery (Not tested)
value.battery (Not tested)
alarm
level.temperature
switch
value.humidity
level.dimmer

If iobroker.weatherground is used, forecast Objects are explicit removed from homekit.

Within Homekit you can see the actual temperature and humidity from the Thermostat. The Switch can be used within Homekit.

Changelog

0.1.4 (2016-03-05)

(husky-koglhof) Fixed Exception (error: TypeError: Cannot read property 'val' of null)

0.1.3 (2016-03-05)

(husky-koglhof) Fixed Exception (error exception: Cannot read property 'CurrentTemperature' of undefined) Added Debug log for Types

0.1.2 (2016-02-23)

(husky-koglhof) Added Dependency hap-nodejs 0.2.4 (No longer Reload / Timeout Failure available) Tested alarm role (With zwave Adapter)

0.1.1 (2016-01-31)

(husky-koglhof) fixed: Error when weatherground Adapter not found added: Role level.dimmer (Switch and Brightness)

0.1.0 (2016-01-29)

(husky-koglhof) fixed: timeout of homekit protocol fixed: zwave states change loop added: States are updated automatically in iOS added: zWave Objects

0.0.10 (2016-01-23)

(husky-koglhof) changed Store to correct path

0.0.8 (2016-01-22)

(husky-koglhof) Moved persistent Store to iobroker-data/homekit.0 removed sensor.* Types added WeatherUnderGround Feature (forecast Objects are disabled)

0.0.7 (2015-12-13)

(husky-koglhof) Fixed saving admin Settings

0.0.6 (2015-12-12)

(husky-koglhof) Added new Devices Temperature can now be a negative Value (Needed for Outdoor Temperature) Package Name changed to lowercase Removed Dependency for installation of Packages

0.0.5 (2015-12-07)

(husky-koglhof) Added admin Table for Devices

0.0.4 (2015-12-05)

(husky-koglhof) Replaced hardcoded Values for Homematic Added Configuration for generic Objects. Currently tested: Homematic HM-CC-TC, HM-CC-RT-DN (CurrentTemperature, Setpoint, Humidity) HM-LC-Sw1-FM, HM-LC-Sw2-FM, HM-LC-Sw4-DR (Switch) MAX BC-RT-TRX-CyG-3 (CurrentTemperature, Setpoint) ZWave FGWPE (Switch), FGSS101 (Temperature), Danfoss Living Connect Radiator Thermostat (Temperature)

0.0.3 (2015-09-27)

(husky-koglhof) added Support for HM-CC-TC, HM-CC-RT-DN and BC-RT-TRX-CyG-3 Thermostat Supported now Actual Temperature, Set Temperature, Humidity

0.0.2 (2015-09-27)

(husky-koglhof) Refresh States if "Room" is refreshed.

0.0.1 (2015-09-26)

(husky-koglhof) Initial commit. Still non-functional.

Todo

Implement set Temperature for Homematic, etc.

License

Lizenz

CC BY-NC-SA 4.0

Der obige Urheberrechtsvermerk ist in allen Kopien oder Teilkopien der Software beizulegen.

DIE SOFTWARE WIRD OHNE JEDE AUSDRÜCKLICHE ODER IMPLIZIERTE GARANTIE BEREITGESTELLT, EINSCHLIESSLICH DER GARANTIE ZUR BENUTZUNG FÜR DEN VORGESEHENEN ODER EINEM BESTIMMTEN ZWECK SOWIE JEGLICHER RECHTSVERLETZUNG, JEDOCH NICHT DARAUF BESCHRÄNKT. IN KEINEM FALL SIND DIE AUTOREN ODER COPYRIGHTINHABER FÜR JEGLICHEN SCHADEN ODER SONSTIGE ANSPRÜCHE HAFTBAR ZU MACHEN, OB INFOLGE DER ERFÜLLUNG EINES VERTRAGES, EINES DELIKTES ODER ANDERS IM ZUSAMMENHANG MIT DER SOFTWARE ODER SONSTIGER VERWENDUNG DER SOFTWARE ENTSTANDEN.

HomeMatic und BidCoS sind eingetragene Warenzeichen der eQ-3 AG

PArns/ioBroker.homekit