Pinned Repositories
16f15325
Microchip 16F15325
16F1824
Microchip 16F1824
180348-DIY-Soldering-Station
180348 / 150500 DIY Soldering Station
18f2455bstrap
Software for a usb bootstrapper for the Microchip 18f2455
22085_IOT7_Masters2018
demo and content development for Masters2018 IOT7 class
32-bit-input-capture-on-PIC24
Implementing 32-bit input capture on PIC24 and family of MCUs
48-leds-with-pic16f877a
Code samples for microcontrollers
freeRTOS-PIC24-dsPIC-PIC32MM
This repository contains the freeRTOS demos for Microchip device families like PIC24, dsPIC33E, dsPIC33F , dsPIC33C and PIC32MM.
Microchip-1
Microchip PIC templates & examples
sdcc
SDCC is a retargettable, optimizing standard C (ANSI C89, ISO C99, ISO C11) compiler that targets a growing list of processors including the Intel 8051, Maxim 80DS390, Zilog Z80, Z180, Rabbit 2000, gbz80, Motorola 68HC08, S08 and STMicroelectronics STM8 targets. There also is incomplete support for the Microchip PIC16 and PIC18. Fork of https://svn.code.sf.net/p/sdcc/code/trunk
PICdew's Repositories
PICdew/atmega4808-air-quality-monitor-mplab
This is the MPLAB X firmware associated with AN3403 Indoor Air Quality Monitor: Concept and Implementation.
PICdew/hdmi
Send video/audio over HDMI on an FPGA
PICdew/pic16f15245-lpc-demo-code
This repository is the demo code for the PIC16F15245 device on the Low Pin Count (LPC) curiosity board.
PICdew/pic16f18446-cnano-greenhouse
A plant monitoring system with PIC16F18446 which provides automated control of soil moisture and air humidity in a greenhouse. It also displays the environment parameters: air humidity, soil moisture and temperature.
PICdew/pic18f47q10-cnano-adcc-low-pass-filtering-bare
Code example that shows how to configure ADCC to give a conversion averaged through a low pass filter.
PICdew/pic18f47q10-cnano-adcc-low-pass-filtering-mcc
A code example that shows how to configure ADCC to give a conversion averaged through a low pass filter.
PICdew/pic18f47q10-cnano-adcc-single-measurement-bare
A code examples that shows how to configure the ADCC to read one analog value.
PICdew/pic18f47q10-cnano-adcc-single-measurement-mcc
A code example that shows how to configure the ADCC to read a single analog value.
PICdew/pic18f47q10-cnano-adcc-spike-trigger-bare
A code example that configures the ADCC to provide an interrupt when a sharp increase or decrease is detected in the sampled value.
PICdew/pic18f47q10-cnano-adcc-spike-trigger-mcc
A code example that configures the ADCC to provide an interrupt when a sharp increase or decrease is detected in the sampled value.
PICdew/pic18f47q10-cnano-adcc-temperature-bare
A code example that configures the ADCC to provide a measurement of the internal temperature of the microcontroller.
PICdew/pic18f47q10-cnano-adcc-temperature-mcc
A code example that configures the ADCC to provide a measurement of the internal temperature of the microcontroller.
PICdew/pic18f47q10-cnano-eusart-hello-world-bare
This example shows how to send a string to the PC and see it in the MPLAB Data Visualizer Terminal.
PICdew/pic18f47q10-cnano-pwm-basic-demo-mcc
PIC18F47Q10 PWM Basic Configuration - MCC code example
PICdew/pic18f47q10-cnano-pwm-constant-on-time-mcc
PIC18F47Q10 PWM Constant on-time - MCC code examples
PICdew/pic18f47q10-cnano-pwm-rgb-led-bare
PIC18F47Q10 PWM RGB-LED Using Interrupts - bare metal code example
PICdew/pic18f47q10-cnano-pwm-rgb-led-mcc
PIC18F47Q10 PWM RGB-LED Using Interrupts - MCC code example
PICdew/pic18f47q10-cnano-spi-master-send-bare
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and sends data to two slave devices, one at a time. The repository contains the bare metal code for the application.
PICdew/pic18f47q10-cnano-spi-master-send-fs
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and sends data to two slave devices, one at a time. The repository contains the Foundation Services Generated code for the application.
PICdew/pic18f47q10-cnano-spi-mode-change-bare
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and it is used to send data to a slave device, in data mode 3. The repository contains the bare metal code for the application.
PICdew/pic18f47q10-cnano-spi-mode-change-fs
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and it is used to send data to a slave device, in data mode 3. The repository contains the Foundation Services Generated code for the application.
PICdew/pic18f47q10-cnano-spi-mode-change-mcc
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as master and it is used to send data to a slave device, in data mode 3. The repository contains the MCC Generated code for the application.
PICdew/pic18f47q10-cnano-spi-slave-int-bare
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used to exchange data. The data transfer is triggered by interrupts. The repository contains the bare metal code for the application.
PICdew/pic18f47q10-cnano-spi-slave-int-fs
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used to exchange data. The data transfer is triggered by interrupts. The repository contains the Foundation Services Generated code for the application.
PICdew/pic18f47q10-cnano-spi-slave-int-mcc
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used to exchange data. The data transfer is triggered by interrupts. The repository contains the MCC Generated code for the application.
PICdew/pic18f47q10-cnano-spi-slave-receive-bare
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used receive data from a master device. The repository contains the bare metal code for the application.
PICdew/pic18f47q10-cnano-spi-slave-receive-fs
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used receive data from a master device. The repository contains the Foundation Services Generated code for the application.
PICdew/pic18f47q10-cnano-spi-slave-receive-mcc
The PIC18F47Q10 features two MSSP modules, which can be configured in SPI mode. In this demo, the SPI is configured as slave and it is used receive data from a master device. The repository contains the MCC Generated code for the application.
PICdew/pic18f47q84-curiosity-hpc-demo-code
PIC18F47Q84 Curiosity High Pin Count (HPC) Development board basic code examples.
PICdew/Qwiic_Mux_TCA9548A
The Qwiic Mux Breakout enables communication with multiple I2C devices that have the same address and gets them all talking on the same bus!