The first CFW that you actually need on Kobra 3.
- Web interface on device's IP
- Removed some shady tricks in printer.cfg (accelerometer additional config, etc.)
- SSH / ADB access (
root:rockchip/adb connect IP:5555) - Based on 2.3.2.9
- Download latest archive from Releases
- Unpack it's content onto the FAT32 USB drive (Do not rename or move anything until otherwise stated)
- If you're on firmware lower than 2.3.2.9, then rename folder "aGVscF9zb3Nf" to "update"
- Plug USB drive into the printer
- Settings => Device Informations => Printer information => Firmware version (NOT the Wi-Fi IP address)
- There should be an orange button next to the row, click it and wait for the installation to finish
- Python 3.11
- Moonraker - Modified for Kobra 3 (https://github.com/utkabobr/moonraker/tree/duckpro), emulating Heightmap instead of goklipper, emulating required features that goklipper doesn't support
- Nginx
- Mainsail
- fbgrab
- socat
- Disabled ADB kill
- Restored OpenSSH - (
root:rockchip) - Cool At Doom's Gate beeper script on installation (Ported from here)
- Based on 2.3.2.9
Use path /useremain/dist/bin/ for most of the binaries
Use ./create_update.sh