PSUmodeling/MM-PIHM

Issues

• What QGIS version can be used to adapt the plug-in pihmgis

  #30 opened a year ago by Liuhexin6688
  1

• Precipitation concentration

  #31 opened a year ago by 2012konrad77
  0

• MINERALS reaction is missing from database

  #24 opened 3 years ago by KayalvizhiSadayappan
  0

• Species missing from database error message

  #25 opened 3 years ago by KayalvizhiSadayappan
  0

• Change in order of mineral kinetics leads to incorrect calculation of reaction

  #28 opened 3 years ago by KayalvizhiSadayappan
  1

• How to build a programmable environment with source code

  #29 opened 4 years ago by TGISer
  0

• THERMO parameter in *.chem input file inactive

  #27 opened 4 years ago by DevonKerins
  0

• Chem file input format

  #26 opened 4 years ago by shiyuning
  0

• Make Error: Permission Denied

  #22 opened 4 years ago by DevonKerins
  2

• Output file format

  #23 opened 4 years ago by KayalvizhiSadayappan
  3

• Variable name "soilw" should be "rootw"

  #21 opened 5 years ago by shiyuning
  0

• Combine output files in two-grid model and include headers

  #18 opened 5 years ago by shiyuning
  1

• Use separate calibration for shallow and deep hydraulic conductivities

  #19 opened 5 years ago by shiyuning
  0

• Warning should be given when land cover/soil types cannot be linked

  #20 opened 5 years ago by shiyuning
  0

• Element primary concentration not updated in transport mode

  #17 opened 5 years ago by shiyuning
  0

• Improve boundary condition input

  #16 opened 5 years ago by shiyuning
  0

• Speciation not performed correctly

  #15 opened 5 years ago by shiyuning
  0

• River primary concentration not updated in transport mode

  #14 opened 5 years ago by shiyuning
  0

• Add glacier representation to Flux-PIHM

  #12 opened 6 years ago by shiyuning
  0

• Spin-up functionality should be added

  #9 opened 7 years ago by shiyuning
  0

• Calculation of "application rate" for macropore flow

  #10 opened 7 years ago by shiyuning
  0

• Input files are not backed up

  #11 opened 7 years ago by shiyuning
  0

• Model crashes when initial condition print interval set to 0

  #8 opened 7 years ago by shiyuning
  0

• Hydrologic initial conditions not written when spinning up bgc

  #7 opened 7 years ago by shiyuning
  0

• Absolute tolerance for Flux-PIHM-BGC should be vector

  #6 opened 7 years ago by shiyuning
  0

• Neumann type boundary conditions are not correctly handled

  #5 opened 7 years ago by shiyuning
  0

• .bc file should be read in only when needed

  #4 opened 7 years ago by shiyuning
  0

• Water balance problem

  #3 opened 7 years ago by shiyuning
  0

• River fluxes from upstream not correctly calculated when OMP is used

  #2 opened 7 years ago by shiyuning
  0