Oled display example for displays using SSD130x driver Copyright 2016 Nathael Pajani <nathael.pajani@ed3l.fr> /* **************************************************************************** * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * *************************************************************************** */ This example shows the support of the I²C driver for the Adafruit SSD1306 oled display controller, it is a 128 x 64 Oled display board. For Adafruit Oled you need to connect the reset pin, for this example it is connected to the GPIO_0_0 of the micro-controller.