NOTE: This project is alpha stage. Flags, configuration, behavior and design may change significantly in following releases.
The kube-rbac-proxy is a small HTTP proxy for a single upstream, that can perform RBAC authorization against the Kubernetes API using SubjectAccessReviews.
In Kubernetes clusters without NetworkPolicies any Pod can perform requests to every other Pod in the cluster. This proxy was developed in order to restrict requests to only those Pods, that present a valid and RBAC authorized token or client TLS certificate.
The kube-rbac-proxy has all glog flags for logging purposes. To use the kube-rbac-proxy there are a few flags you may want to set:
--upstream: This is the upstream you want to proxy to.--config-file: This file specifies details on the SubjectAccessReview you want to be performed on a request. For example, this could contain that an entity performing a request has to be allowed to perform ageton the Deployment calledmy-frontend-app, as well as the ability to configure whether SubjectAccessReviews are rewritten based on requests.
See the examples/ directory for the following examples:
- non-resource-url example
- resource-attributes example
- oidc example
- rewriting SubjectAccessReviews based on request query parameters
All command line flags:
$ kube-rbac-proxy -h
Usage of _output/linux/amd64/kube-rbac-proxy:
--alsologtostderr log to standard error as well as files
--auth-header-fields-enabled When set to true, kube-rbac-proxy adds auth-related fields to the headers of http requests sent to the upstream
--auth-header-groups-field-name string The name of the field inside a http(2) request header to tell the upstream server about the user's groups (default "x-remote-groups")
--auth-header-groups-field-separator string The separator string used for concatenating multiple group names in a groups header field's value (default "|")
--auth-header-user-field-name string The name of the field inside a http(2) request header to tell the upstream server about the user's name (default "x-remote-user")
--client-ca-file string If set, any request presenting a client certificate signed by one of the authorities in the client-ca-file is authenticated with an identity corresponding to the CommonName of the client certificate.
--config-file string Configuration file to configure kube-rbac-proxy.
--insecure-listen-address string The address the kube-rbac-proxy HTTP server should listen on.
--kubeconfig string Path to a kubeconfig file, specifying how to connect to the API server. If unset, in-cluster configuration will be used
--log_backtrace_at traceLocation when logging hits line file:N, emit a stack trace (default :0)
--log_dir string If non-empty, write log files in this directory
--logtostderr log to standard error instead of files
--oidc-ca-file string If set, the OpenID server's certificate will be verified by one of the authorities in the oidc-ca-file, otherwise the host's root CA set will be used.
--oidc-clientID string The client ID for the OpenID Connect client, must be set if oidc-issuer-url is set.
--oidc-groups-claim string Identifier of groups in JWT claim, by default set to 'groups' (default "groups")
--oidc-groups-prefix string If provided, all groups will be prefixed with this value to prevent conflicts with other authentication strategies.
--oidc-issuer string The URL of the OpenID issuer, only HTTPS scheme will be accepted. If set, it will be used to verify the OIDC JSON Web Token (JWT).
--oidc-sign-alg stringArray Supported signing algorithms, default RS256 (default [RS256])
--oidc-username-claim string Identifier of the user in JWT claim, by default set to 'email' (default "email")
--secure-listen-address string The address the kube-rbac-proxy HTTPs server should listen on.
--stderrthreshold severity logs at or above this threshold go to stderr (default 2)
--tls-cert-file string File containing the default x509 Certificate for HTTPS. (CA cert, if any, concatenated after server cert)
--tls-cipher-suites strings Comma-separated list of cipher suites for the server. Values are from tls package constants (https://golang.org/pkg/crypto/tls/#pkg-constants). If omitted, the default Go cipher suites will be used
--tls-min-version string Minimum TLS version supported. Value must match version names from https://golang.org/pkg/crypto/tls/#pkg-constants. (default "VersionTLS12")
--tls-private-key-file string File containing the default x509 private key matching --tls-cert-file.
--upstream string The upstream URL to proxy to once requests have successfully been authenticated and authorized.
--upstream-ca-file string The CA the upstream uses for TLS connection. This is required when the upstream uses TLS and its own CA certificate
--upstream-force-h2c Force h2c to communiate with the upstream. This is required when the upstream speaks h2c(http/2 cleartext - insecure variant of http/2) only. For example, go-grpc server in the insecure mode, such as helm's tiller w/o TLS, speaks h2c only
-v, --v Level log level for V logs
--vmodule moduleSpec comma-separated list of pattern=N settings for file-filtered loggingYou may ask yourself, why not just use the Kubernetes apiserver proxy functionality? There are two reasons why this makes sense, the first is to take load off of the Kubernetes API, so it can be used for actual requests serving the cluster components, rather than in order to serve client requests. The second and more important reason is, this proxy is intended to be a sidecar that accepts incoming HTTP requests. This way, one can ensure that a request is truly authorized, instead of being able to access an application simply because an entity has network access to it.
I developed this proxy in order to be able to protect Prometheus metrics endpoints. In a scenario, where an attacker might obtain full control over a Pod, that attacker would have the ability to discover a lot of information about the workload as well as the current load of the respective workload. This information could originate for example from the node-exporter and kube-stat-metrics. Both of those metric sources can commonly be found in Prometheus monitoring stacks on Kubernetes.
This project was created to specifically solve the above problem, however, I felt there is a larger need for such a proxy in general.
On an incoming request, kube-rbac-proxy first figures out which user is performing the request. The kube-rbac-proxy supports using client TLS certificates, as well as tokens. In case of a client certificates, the certificate is simply validated against the configured CA. In case of a bearer token being presented, the authentication.k8s.io is used to perform a TokenReview.
Once a user has been authenticated, again the authentication.k8s.io is used to perform a SubjectAccessReview, in order to authorize the respective request, to ensure the authenticated user has the required RBAC roles.
Note that when using tokens for authentication, the receiving side can use the token to impersonate the client. Only use token authentication, when the receiving side is already higher privileged or the token itself is super low privileged, such as when the only roles binded to it are for authorization purposes with this project. Passing around highly privileged tokens is a security risk, and is not recommended.
This project was built to be used to protect metrics of cluster components. These cluster components are much higher privileged than the Prometheus Pod, so if those Pods were to use the token provided by Prometheus it would actually be lower privileged. It is not recommended to use this method for non infrastructure components.
For better security properties use mTLS for authentication instead, and for user authentication, other methods have yet to be added.
There are a couple of reasons why the existance of NetworkPolicies may not cover the same use case(s):
- NetworkPolicies are not available in all providers, installers and distros.
- NetworkPolicies do not apply to Pods with HostNetworking enabled, the use case I created this project with the Prometheus node-exporter requires this.
- Once TLS/OIDC is supported, the kube-rbac-proxy can be used to perform AuthN/AuthZ on users.
This projects is not intended to compete with Envoy or IstioMesh. Although on the surface they seem similar, the goals and usage complement each other. It's perfectly ok to use Envoy as the ingress point of traffic of a Pod, which then forwards traffic to the kube-rbac-proxy, which in turn then proxies to the actually serving application.
Additionally, to my knowledge Envoy neither has nor plans Kubernetes specific RBAC/AuthZ support (maybe it shouldn’t even). My knowledge may very well be incomplete, please point out if it is. After all I'm happy if I don't have to maintain more code, but as long as this serves a purpose to me and no other project can provide it, I'll maintain this.
PR are more than welcome!
- Tests