early-ssh gives you an SSH server during the boot of your Linux system. It starts before the root filesystem is mounted so you can unlock your encrypted root filesystem interactively, you don't have to be at the console of your server. You can also scp files to your server so you can even start your key-encrypted system.
early-ssh is basically an update-iniramfs hook script and a boot script that starts dropbear SSH server in the initramfs during boot.
You can copy files to the server using scp from a remote host. This way you it is possible to copy key files to unlock key-based LUKS even for the root filesystem.
It is possible to use a different root password than the one use on your system (it can be disabled as well) by adding a SHADOW_OVERRIDE option specifying a different shadow file.
See PASSWD_OVERRIDE, SHADOW_OVERRIDE, GROUP_OVERRIDE in config.
Example: SHADOW_OVERRIDE="/etc/early-ssh/shadow"
A timeout can be specified to continue the boot after a certain time.
See TIMEOUT in config.
Example: TIMEOUT=600
If you have more than one network interface and they get scrambled on boot it is possible to specify the correct interface by MAC address instead of the name ("eth0" for example).
See IFACE in config.
Example: IFACE="MAC 01:02:03:04:05:06"
You can move the early-ssh server on a different port.
See PORT in config.
Example: PORT=2233
content of zaphod-init.sh
#!/bin/sh
# load the RAID-1 module for mdadm
modprobe raid1
# create the md special devices
for i in 0 1 2 3; do mknod /dev/md${i} b 9 ${i}; done
# scan for all mdadm arrays (can be good if you forget to update your initramfs)
mdadm --examine --scan > /tmp/mdadm.conf
# assemble the RAID-1 arrays
mdadm --assemble --scan --config /tmp/mdadm.conf
# load the dm-crypt module for LUKS
modprobe dm-crypt
# do the LUKS openings (md0 is the /boot, so it is not encrypted!)
for i in 1 2 3; do cryptsetup --key-file /tmp/zaphod-md${i}.key luksOpen /dev/md${i} md${i}_crypt; done
An SSH session:
mobilem00:/mnt/pendrive# scp zaphod-init/* root@xxx.xxx.xxx.xxx:/tmp
root@xxx.xxx.xxx.xxx's password:
zaphod-init.sh 100% 338 0.3KB/s 00:00
zaphod-md1.key 100% 256 0.3KB/s 00:00
zaphod-md2.key 100% 256 0.3KB/s 00:00
zaphod-md3.key 100% 256 0.3KB/s 00:00
mobilem00:/mnt/pendrive# ssh root@xxx.xxx.xxx.xxx
root@xxx.xxx.xxx.xxx's password:
Welcome to early-ssh!
After you have finished everything, run the following to continue booting:
finished
Please send your comments and bugreports to <xxx@xxx.xx>
BusyBox v1.1.3 (Debian 1:1.1.3-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
~ # chmod 700 /tmp/zaphod-init.sh
~ # /tmp/zaphod-init.sh
mdadm: /dev/md0 has been started with 2 drives.
mdadm: /dev/md1 has been started with 2 drives.
mdadm: /dev/md2 has been started with 2 drives.
mdadm: /dev/md3 has been started with 2 drives.
key slot 0 unlocked.
Command successful.
key slot 0 unlocked.
Command successful.
key slot 0 unlocked.
Command successful.
~ # finished
Your session will be now terminated and the boot will be continued. Bye!
Connection to xxx.xxx.xxx.xxx closed by remote host.
Connection to xxx.xxx.xxx.xxx closed.
ssh root@1.2.3.4
modprobe raid1
mdadm --examine --scan > /tmp/mdadm.conf
mdadm --assemble --scan --config /tmp/mdadm.conf
finished
ssh root@1.2.3.4
modprobe dm_crypt
cryptsetup luksOpen /dev/sda2 sda2_crypt
finished
ssh root@1.2.3.4
modprobe raid1
mdadm --examine --scan > /tmp/mdadm.conf
mdadm --assemble --scan --config /tmp/mdadm.conf
modprobe drbd
hostname trish
ifconfig eth1 172.16.254.1 netmask 255.255.255.0 up
drbdadm up r0
drbdadm primary r0
modprobe dm_crypt
cryptsetup luksOpen /dev/drbd0 drbd0_crypt
pvscan
vgchange -a y
finished