/zigbee-stick-v4

Zigbee Stick based on RF-BM-2652P1/P2 Module from RF-STAR,with CC2652P on board

GNU General Public License v3.0GPL-3.0

ZigStar

Features:

  • TI CC2652P SimpleLinkā„¢ 2.4 GHz Multiprotocol Wireless MCU targeting Zigbee,Bluetooth 5.1 Low Energy,Thread + 19.5-dBm high-power amplifier
  • Support RF-BM-2652P1 and RF-BM-2652P2 Module from RF-STAR,with CC2652P on board
  • BSL,RST Buttons
  • 2 LED for indication
  • Compatible with Z2M
  • SMA antenna port for an external antenna
  • Self-programming via the TI CC-series serial bootloader. If is not disabled in code.
  • Communicates via the common CH340E/CH340C USB-UART Bridge

Boards fit in v.3 Stick Case designed by Jager

Revisions

There are 2 versions of stick:

Both versions use the same 3D Model Case

Bill of Materials:

EasyEDA Generated Boom,you can order on LCSC directly - BOOM

Designator Name Footprint Quantity
U1 RF-BM-2652P1/P2 1
U2 AMS1117-3.3 SOT-223 1
U3 CH340E/CH340C MSOP-10/SOP-16 1
R1 10 kohm SMD 0805 1
R2,R3 1 kohm SMD 0805 2
R4 100 ohm SMD 0805 1
C1 10uF SMD_L3.2-W1.6 1
C2,C4 100nF SMD 0805 2
C3 22uF SMD_L3.2-W1.6 1
L1,L2 RED/GREEN LED SMD 0805 2
SBL,RST PUSH BUTTON SMD_L3.9-W3.0-P4.45 2
USB USB A MALE USB-A-SMD_USB-A-1-TH 1
JTAG PIN HEADER 5 PIN 2.54x5P 1
ANT SMA ANTENNA PORT 1.6mm 1
D1 ESD USBLC6-2SC6 SOT-23-6 1

WARNING D1 is used only for CH340C version stick.

Next items are not available on LCSC,you can get them on Aliexpress:

Downloads

Thanks go to:

  • @Jager, @Palco, @Egony for design review and comments
  • Name Credit goes to nurikk, before board had a very boring name. Many thanks to him for a lot of work on Z2M and DIY Devices.

Contact

For general enquiries, suggestions and errors spotted: Email me at radu@grecu.info or write me directly in Telegram. Community contributions to this page are very much encouraged so you could also send pull requests with your proposed changes.

Disclamer

We use aliexpress affiliate links for the components and the tools. Some Ad-blockers might block these links an thus they seem to appear broken. You will have to temporarely disable ad-blocker to open these links.

License

zigbee-stick-v4 is designed by DarthPCB's / Grecu Radu and licensed under the GPL-3.0 License.