XiangShan

XiangShan (香山) is an open-source high-performance RISC-V processor project.

中文说明在此。

Docs and slides

We gave 20+ presentations on RISC-V World Conference China 2021. XiangShan tutorial was held at the same place. Our slides for RVWC2021 have been updated on our doc repo (in Chinese).

我们在2021年RISC-V**峰会的报告已经更新到这里。未来的文档和相关信息也将更新到相同的仓库。

Architecture

The first stable micro-architecture of XiangShan is called Yanqihu (雁栖湖) on this branch, which has been developed since June 2020. The current version of XiangShan, also known as Nanhu (南湖), is still under development on the master branch.

The micro-architecture overview is shown below.

Sub-directories Overview

Some of the key directories are shown below.

.
├── fpga                   # supported FPGA boards and files to build a Vivado project
├── read-to-run            # pre-built simulation images
├── scripts                # scripts for agile development
└── src
    ├── test               # test files (including diff-test, module-test, etc.)
    └── main/scala         # design files
        ├── bus/tilelink   # tilelink utils
        ├── device         # virtual device for simulation
        ├── difftest       # diff-test chisel interface
        ├── system         # SoC wrapper
        ├── top            # top module
        ├── utils          # utilization code
        ├── xiangshan      # main design code
        └── xstransforms   # some useful firrtl transforms

Generate Verilog

Run make verilog to generate verilog code. The output file is build/XSTop.v.
Refer to Makefile for more information.

Run Programs by Simulation

Prepare environment

Set environment variable NEMU_HOME to the absolute path of the NEMU project.
Set environment variable NOOP_HOME to the absolute path of the XiangShan project.
Set environment variable AM_HOME to the absolute path of the AM project.
Install mill. Refer to the Manual section in this guide.
Clone this project and run make init to initialize submodules.

Run with simulator

Install Verilator, the open-source Verilog simulator.
Run make emu to build the C++ simulator ./build/emu with Verilator.
Refer to ./build/emu --help for run-time arguments of the simulator.
Refer to Makefile and verilator.mk for more information.

Example:

make emu CONFIG=MinimalConfig SIM_ARGS=--disable-log EMU_THREADS=2 -j10
./build/emu -b 0 -e 0 -i ./ready-to-run/coremark-2-iteration.bin --diff ./ready-to-run/riscv64-nemu-interpreter-so

Acknowledgement

In the development of XiangShan, some sub-modules from the open-source community are employed. All relevant usage is listed below.

Sub-module	Source	Detail
L2 Cache/LLC	Sifive block-inclusivecache	We enhance the function and the timing of the original module, finally turning it into a Cache generator that can be configured as L2/LLC.
Diplomacy/TileLink	Rocket-chip	We reused the diplomacy framework and TileLink utility that exist in rocket-chip to negotiate bus.
FPU	Berkeley hardfloat	We use Berkeley-hardfloat as our FPU and implement an SRT-4 div/sqrt unit for it. Additionally, we split the FMA pipeline to optimize the timing.

We are grateful for the support of the open-source community and encourage other open-source projects to reuse our code within the scope of the license.

PhoenixTreeember/XiangShan