DataTamer is a library to log/trace numerical variables over time and takes periodic "snapshots" of their values, to later visualize them as timeseries.

It works great with PlotJuggler, the timeseries visualization tool (note: you will need PlotJuggler 3.8.2 or later).

DataTamer is "fearless data logger" because you can record hundreds or thousands of variables: even 1 million points per second should have a fairly small CPU overhead.

Since all the values are aggregated in a single "snapshot", it is usually meant to record data in a periodic loop (a very frequent use case, in robotics applications).

Kudos to pal_statistics, for inspiring this project.

How it works

DataTamer can be used to monitor multiple variables in your applications.

Channels are used to take "snapshots" of a subset of variables at a given time. If you want to record at different frequencies, you can use different channels.

DataTamer will forward the collected data to 1 or multiple sinks; a sink may save the information immediately in a file (currently, we support MCAP) or publish it using an inter-process communication, for instance, a ROS2 publisher.

You can easily create your own, specialized sinks.

Use PlotJuggler to visualize your logs offline or in real-time.

Features

Serialization schema is created at run-time: no need to do code generation.
Suitable for real-time applications: very low latency (on the side of the callee).
Multi-sink architecture: recorded data can be forwarded to multiple "backends".
Very low serialization overhead, in the order of 1 bit per traced value.
The user can enable/disable traced variables at run-time.

Limitations

Traced variables can not be added (registered) once the recording starts (first takeSnapshot).
Focused on periodic recording. Not the best option for sporadic, asynchronous events.
If you use DataTamer::registerValue you must be careful about the lifetime of the object. If you prefer a safer RAII interface, use DataTamer::createLoggedValue instead.

Examples

Basic example

#include "data_tamer/data_tamer.hpp"
#include "data_tamer/sinks/mcap_sink.hpp"

int main()
{
  // Multiple channels can use this sink. Data will be saved in mylog.mcap
  auto mcap_sink = std::make_shared<DataTamer::MCAPSink>("mylog.mcap");

  // Create a channel and attach a sink. A channel can have multiple sinks
  auto channel = DataTamer::LogChannel::create("my_channel");
  channel->addDataSink(mcap_sink);

  // You can register any arithmetic value. You are responsible for their lifetime!
  double value_real = 3.14;
  int value_int = 42;
  auto id1 = channel->registerValue("value_real", &value_real);
  auto id2 = channel->registerValue("value_int", &value_int);

  // If you prefer to use RAII, use this method instead
  // logged_real will unregister itself when it goes out of scope.
  auto logged_real = channel->createLoggedValue<float>("my_real");

  // Store the current value of all the registered values
  channel->takeSnapshot();

  // You can disable (i.e., stop recording) a value like this
  channel->setEnabled(id1, false);
  // or, in the case of a LoggedValue
  logged_real->setEnabled(false);

  // The next snapshot will contain only [value_int], i.e. [id2],
  // since the other two were disabled
  channel->takeSnapshot();
}

How to register custom types

Containers such as std::vector and std::array are supported out of the box. You can also register a custom type, as shown in the example below.

#include "data_tamer/data_tamer.hpp"
#include "data_tamer/sinks/mcap_sink.hpp"
#include "data_tamer/custom_types.hpp"

// a custom type
struct Point3D
{
  double x;
  double y;
  double z;
};

namespace DataTamer
{
template <> struct TypeDefinition<Point3D>
{
  // Provide the name of the type
  std::string typeName() const { return "Point3D"; }
  // List all the member variables that you want to be saved (including their name)
  template <class Function> void typeDef(Function& addField)
  {
    addField("x", &Point3D::x);
    addField("y", &Point3D::y);
    addField("z", &Point3D::z);
  }
}
} // end namespace DataTamer

int main()
{
  auto channel = DataTamer::LogChannel::create("my_channel");
  channel->addDataSink(std::make_shared<DataTamer::MCAPSink>("mylog.mcap"));

  // Array/vectors are supported natively
  std::vector<double> values = {1, 2, 3, 4};
  channel->registerValue("values", &values);

  // Requires the implementation of DataTamer::TypeDefinition<Point3D>
  Point3D position = {0.1, -0.2, 0.3};
  channel->registerValue("position", &position);

  // save the data as usual ...
  channel->takeSnapshot();
}

Compilation

Compiling with ROS2

Just use colcon :)

Compiling with Conan (not ROS2 support)

Note that the ROS2 publisher will NOT be built when using this method.

Assuming conan 2.x installed. From the source directory.

Release:

conan install . -s compiler.cppstd=gnu17 --build=missing -s build_type=Release
cmake -S . -B build/Release -DCMAKE_BUILD_TYPE=Release \
      -DCMAKE_TOOLCHAIN_FILE="build/Release/generators/conan_toolchain.cmake"
cmake --build build/Release --parallel

Debug:

conan install . -s compiler.cppstd=gnu17 --build=missing -s build_type=Debug
cmake -S . -B build/Debug -DCMAKE_BUILD_TYPE=Debug \
      -DCMAKE_TOOLCHAIN_FILE="build/Debug/generators/conan_toolchain.cmake"
cmake --build build/Debug --parallel

How to deserialize data recorded with DataTamer

I will write more extensively about the serialization format used by DataTamer, but for the time being I created a single header file without external dependencies that you can just copy into your project: data_tamer_parser.hpp

You can see how it is used in this example: mcap_reader

PickNikRobotics/data_tamer