PimDoos/ha-sessy

Issues

• Settings entities unavailable (Error setting firmware specific settings)

  #97 opened 5 months ago by DvdEnde
  12

• Sessy werkt niet in HA na update 17.2

  #102 opened a month ago by basvanamerongen
  1

• Add Energy sensors

  #8 opened a month ago by PimDoos
  24

• [Feature Request] configure sensor.sessy_XXXX_state_of_charge entity to track statistics

  #96 opened 5 months ago by RogierSchuring
  3

• Eco NOM Charging Enabled does not turn on

  #94 opened 6 months ago by PimDoos
  0

• Updating state for sensor took 0.43 seconds

  #91 opened 6 months ago by KoQuest
  2

• Dynamic mode schedule and EPEX energy price api

  #85 opened 7 months ago by MartijnCharged
  10

• Error updating RSSI sensor when WiFi is not connected

  #86 opened 7 months ago by PimDoos
  0

• Unexpected error

  #83 opened 8 months ago by basvanamerongen
  5

• Efficientie sensor

  #80 opened a year ago by UPS90
  1

• Sessy state of charge % value not correct displayed in home assistant

  #78 opened a year ago by robertjantak
  1

• Add temperature sensor?

  #71 opened a year ago by jpduhen
  2

• CT dongle Total Power

  #75 opened a year ago by eavyon
  3

• Foutmelding bij koppelen aan sessy na update

  #74 opened a year ago by RobAltorf
  5

• Fimware Update 1.5.2

  #72 opened a year ago by RemyWegman
  4

• Button to once fully charge Sessy?

  #69 opened a year ago by StevenLooman
  11

• Error while updating settings on Loud Sessy

  #58 opened a year ago by PimDoos
  2

• New api endpoints

  #64 opened a year ago by MartijnCharged
  2

• home automation API strategy not selectable

  #62 opened a year ago by wakuwaku
  1

• Sessy CT Meter is detected as Sessy P1 meter

  #51 opened a year ago by PimDoos
  0

• Can't connect to wired sessy or P1 dongels

  #53 opened a year ago by Sicos1977
  1

• Installation Error

  #49 opened a year ago by marcelk-workstreampeople-com
  8

• Add configuration parameters

  #7 opened a year ago by PimDoos
  2

• Zeroconf discovers already configured device

  #45 opened a year ago by PimDoos
  0

• Add ZeroConf discovery via mDNS

  #43 opened a year ago by PimDoos
  1

• Firmware versie wordt niet goed weergegeven

  #31 opened a year ago by TomNagel123
  3

• Discharge power is too restrictive

  #37 opened 2 years ago by TomNagel123
  3

• Add entity name translations

  #32 opened 2 years ago by PimDoos
  0

• Current is measured in mA but displayed in A

  #26 opened 2 years ago by PimDoos
  0

• Key variable not resolved in configuration flow

  #24 opened 2 years ago by PimDoos
  1

• Move state translations to strings.json

  #20 opened 2 years ago by PimDoos
  0

• Add P1 status sensor

  #17 opened 2 years ago by PimDoos
  0

• Update entity shows update available when Sessy has not yet checked for the latest version

  #16 opened 2 years ago by PimDoos
  0

• Cache trackers are not cleaned up properly on reload

  #14 opened 2 years ago by PimDoos
  0

• Update progress is displayed incorrectly

  #9 opened 2 years ago by PimDoos
  0

• Phase Voltage sensor does not calculate converted unit properly

  #1 opened 2 years ago by PimDoos
  0