This Guide describes the Correct Usage for CHEF-KOCHS Gaming Tweaks Repo for dummies
- Use-Gaming-Tweaks
- Credits
- Disclaimer
- Part 1
- Part 2
- Part 3
- Part 4
- Part 5
- Part 6
- Part 7
- Additional Tweaks
- End?
Full Credits for this go to CHEF-KOCH and his GamingTweaks Repo <3
Im not responsible for any damage that your pc has after using these files/tweaks. You use them on your own caution. Please do a registry backup and restore point before using the stuff i list here.
Do not use Tweakers and All-in-One Shit e.g AdvancedSystem Care etc etc. Nor use these fishy Regedits from Minecraft Youtubers. If you did i advise you do a clean Install of Windows
To start now we will Tweaky Tweak Windows a bit. You can skip the Part 1 if you want because it involves getting a better Windows Version and installing this Version. If your willing to upgrade your Windows without loosing Data then proceed :3
What you wanna do first is open this List and scroll down to x64. When your at x64 look for your Language code at the end, like for me, i come from Germany so i take x64fre_de-de_ if i want german language. If you want english language ill provide a quick link for you here.
When you finished downloading it go to your C Drive and in the Folder ESD and paste the downloaded file in there. What you wanna grab next is wimlib-decrypter Unzip it in the ESD Folder and drag the .esd file you downloaded onto the decrypt.bat. A window will pop up looking like this
Now we can Continue to Part 2
For that open Regedit by Pressing Windows + R and then type Regedit.
When open navigate to HKEY_CURRENT_USER\Control Panel\Mouse
After you have done that go into the Control Panel and go into mouse settings and edit them like here
If you want something cool to have for less Input Delay go to MouseSync When you unzip it Open the exe, let it install and then reboot. After you rebooted set the Values like this. edit it to your own values though
-
Polling rate: Does nothing for now
-
Resolution X is autofilled (eg 1920 etc etc)
-
Resolution Y is autofilled (eg 1080 etc etc)
-
Physical Screen X is the width of your monitor SCREEN in millimeter for that google your screen and find the active screen resolution
-
Physical Screen Y is the height of your monitor SCREEN in millimeter, for that google your screen and find the active screen resolution
-
Sensitivity X and Y are your Windows Sens in Mouse Settings. If this is in the Middle put 10 and if its 1 bar more left put 12 vice vera
-
Extra Scale X is Sensitivity, Leave it on 1
-
Extra Scale Y is Sensitivity, Leave it on 1
After that press start and wait for it to start and your done. You need to manually open it every time though and if you wanna close it just press stop and close.
After that we move to Part 3
Now we come to Network and again full Credits to CHEF-KOCH here
Rightclick your Internet Adapter and do these settinghs
- Optional disable/change the following in your Network Adapter
- Disable Adaptive Inter-Frame Spacing
- Disable Flow Control
- Disable Interrupt Moderation
- Set Interrupt Moderation Rate to OFF (not needed if you disable Interrupt Moderation)
- Set Enable PME to Disabled
- Disable all “Offload” features
- Disable Packet Priority & VLAN
- Disable Jumbo Packet
- Set Receive Side Scaling (RSS) - ENABLED
- RSS Balancing Mode - NUMAScaling
- Don't touch Speed & Duplex, leave it on Auto Negotiation
then open CMD and paste this into it
netsh interface teredo set state disabled
netsh interface 6to4 set state disabled
netsh winsock reset
netsh interface isatap set state disable
netsh int tcp set global timestamps=disabled
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global congestionprovider=ctcp
netsh int tcp set supplemental Internet congestionprovider=CTCP
netsh int tcp set global chimney=disabled
netsh int tcp set global ecncapability=disabled
netsh int tcp set global rss=enabled
netsh int tcp set global rsc=disabled
netsh int tcp set global dca=enabled
netsh int tcp set global netdma=enabled
PowerShell Disable-NetAdapterChecksumOffload -Name "*"
PowerShell Disable-NetAdapterLso -Name "*"
PowerShell Disable-NetAdapterRsc -Name "*"
PowerShell Disable-NetAdapterIPsecOffload -Name "*"
PowerShell Disable-NetAdapterPowerManagement -Name "*"
PowerShell Disable-NetAdapterQos -Name "*"
PowerShell Disable-MMAgent -MemoryCompression
and after that this
netsh interface teredo set state disable
netsh interface 6to4 set state disable disable
netsh interface isatap set state disable
REG ADD "HKLM\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters" /v "EnableICSIPv6" /t REG_DWORD /d 0 /f
REG ADD "HKLM\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters" /v "DisabledComponents" /t REG_DWORD /d 255 /fand the last one is this which you need to paste into a .txt and then save it as .reg file
Windows Registry Editor Version 5.00
; I do not recommended using this!
; Starting with Windows 1909 this is not anymore needed.
; https://github.com/CHEF-KOCH/GamingTweaks/issues/5
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile]
"NetworkThrottlingIndex"=dword:ffffffff
"SystemResponsiveness"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile\Tasks\Games]
"Scheduling Category"="High"
"SFIO Priority"="High"
"Background Only"="False"2
"Priority"=dword:00000001
"Clock Rate"=dword:00002710
"GPU Priority"=dword:00000001
"Affinity"=dword:0000000
Now we come to the OS Settings. Disable and dont use any Core Unparking Software, as its pretty much useless.
Copy the following text and save it as antitelemetry.cmd.
@echo off
%windir%\system32\reg.exe query "HKU\S-1-5-19" 1>nul 2>nul || goto :eof
echo.
echo Anti-Telemetry blocking script
echo Some of the commands may return error(s) - you can ignore them!
reg add HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate /v DisableOSUpgrade /t REG_DWORD /d 1 /f >nul 2>&1
reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update" /f /v IncludeRecommendedUpdates /t REG_DWORD /d 0 >nul 2>&1
reg delete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade" /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade /v AllowOSUpgrade /t REG_DWORD /d 0 /f >nul 2>&1
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Appraiser" /v HaveUploadedForTarget /t REG_DWORD /d 1 /f >nul 2>&1
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\AIT" /v AITEnable /t REG_DWORD /d 0 /f >nul 2>&1
reg delete "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\ClientTelemetry" /f >nul 2>&1
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\ClientTelemetry" /v DontRetryOnError /t REG_DWORD /d 1 /f >nul 2>&1
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\ClientTelemetry" /v IsCensusDisabled /t REG_DWORD /d 1 /f >nul 2>&1
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\ClientTelemetry" /v TaskEnableRun /t REG_DWORD /d 1 /f >nul 2>&1
reg delete "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags" /v UpgradeEligible /f >nul 2>&1
reg delete "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Appraiser" /f >nul 2>&1
reg delete "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\TelemetryController" /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\IE /v CEIPEnable /t REG_DWORD /d 0 /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\IE /v SqmLoggerRunning /t REG_DWORD /d 0 /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\Reliability /v CEIPEnable /t REG_DWORD /d 0 /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\Reliability /v SqmLoggerRunning /t REG_DWORD /d 0 /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\Windows /v DisableOptinExperience /t REG_DWORD /d 1 /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\Windows /v CEIPEnable /t REG_DWORD /d 0 /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\SQMClient\Windows /v SqmLoggerRunning /t REG_DWORD /d 0 /f >nul 2>&1
sc.exe config DiagTrack start= disabled >nul 2>&1
sc.exe stop DiagTrack >nul 2>&1
reg delete HKLM\SYSTEM\ControlSet001\Control\WMI\AutoLogger\AutoLogger-Diagtrack-Listener /f >nul 2>&1
reg delete HKLM\SYSTEM\ControlSet001\Control\WMI\AutoLogger\Diagtrack-Listener /f >nul 2>&1
reg delete HKLM\SYSTEM\ControlSet001\Control\WMI\AutoLogger\SQMLogger /f >nul 2>&1
reg delete HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\DiagTrack /f >nul 2>&1
reg delete HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection /f >nul 2>&1
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\DiagTrack /v DiagTrackAuthorization /t REG_DWORD /d 0 /f >nul 2>&1
takeown /f %ProgramData%\Microsoft\Diagnosis /A /r /d y >nul 2>&1
icacls %ProgramData%\Microsoft\Diagnosis /grant:r *S-1-5-32-544:F /T /C >nul 2>&1
del /f /q %ProgramData%\Microsoft\Diagnosis\*.rbs >nul 2>&1
del /f /q /s %ProgramData%\Microsoft\Diagnosis\ETLLogs\* >nul 2>&1
schtasks /Change /TN "\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser" /DISABLE >nul 2>&1
schtasks /Change /TN "\Microsoft\Windows\Application Experience\ProgramDataUpdater" /DISABLE >nul 2>&1
schtasks /Change /TN "\Microsoft\Windows\Application Experience\AitAgent" /DISABLE >nul 2>&1
schtasks /Change /TN "\Microsoft\Windows\PerfTrack\BackgroundConfigSurveyor" /DISABLE >nul 2>&1
schtasks /Delete /F /TN "\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser" >nul 2>&1
schtasks /Delete /F /TN "\Microsoft\Windows\Application Experience\ProgramDataUpdater" >nul 2>&1
schtasks /Delete /F /TN "\Microsoft\Windows\Application Experience\AitAgent" >nul 2>&1
schtasks /Delete /F /TN "\Microsoft\Windows\PerfTrack\BackgroundConfigSurveyor" >nul 2>&1
TIMEOUT /T 5then copy this file you created to C:\Windows, open a cmd and type
SCHTASKS /Create /F /RU "SYSTEM" /RL HIGHEST /SC ONSTART /TN BlockW10 /TR "cmd /c %windir%\antitelemetry.cmd"
Credits to CHEF-KOCH
A big part is also to Disable the Windows Update Service or to set it to Manual in Services.msc
Download this, then unzip it in a Folder and in that foler create a Txt. In that txt you paste
start "" "C:\PathToTool\TimerTool.exe" -t 0.5 -minimized
exit
after you have done this save the Txt as a .bat file, rightclick the created bat, make a shortcut. Then press Win + R and type
shell:Startup
and paste the Shortcut you created in there. Voila ur done
Drivers? If you use an NVIDIA GPU use these Drivers repacked by Chef-Koch. To install them uninstall your old Driver with this Guide. After your back to Windows open a CMD and type
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set testsigning ON
shutdown.exe /r /o
Now install the driver with ,,Latest release,, and not ,,Pre-Release,, found here
After it installed successfully open CMD again without rebooting and copy paste this
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF
After you have done that download this, open it as Admin and select your GPU like i do here
Open a Txt and paste these in and save them as .reg to execute them
Windows Registry Editor Version 5.00
; Boost the CPU priority, it's normally not nessary but on some AMD machines that can be useful
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\GTA5.exe\PerfOptions]
"CpuPriorityClass"=dword:00000003
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\gtavlauncher.exe\PerfOptions]
"CpuPriorityClass"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\subprocess.exe\PerfOptions]
"CpuPriorityClass"=dword:00000005
Windows Registry Editor Version 5.00
; Speed up the Shell and the Desktop by increasing (lowering) some timeout's
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced]
"DesktopLivePreviewHoverTime"=dword:00000001
[HKEY_CURRENT_USER\Control Panel\Mouse]
"MouseHoverTime"="1"
[HKEY_CURRENT_USER\Control Panel\Desktop]
"MenuShowDelay"="1"
[HKEY_CURRENT_USER\Control Panel\Desktop]
"ActiveWndTrackTimeout"=dword:0000000a
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced]
"Start_ShowRun"=dword:00000001
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoLowDiskSpaceChecks"=dword:00000001
"LinkResolveIgnoreLinkInfo"=dword:00000001
"NoResolveSearch"=dword:00000001
"NoResolveTrack"=dword:00000001
"NoInternetOpenWith"=dword:00000001
[HKEY_CURRENT_USER\Control Panel\Desktop]
"AutoEndTasks"="1"
"HungAppTimeout"="2000"
"MenuShowDelay"="0"
"WaitToKillAppTimeout"="3000"
"LowLevelHooksTimeout"="2000"
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control]
"WaitToKillServiceTimeout"="2000"
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control]
"WaitToKillServiceTimeout"="2000"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control]
"WaitToKillServiceTimeout"="2000"
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NvTelemetryContainer]
"Start"=dword:00000004
Windows Registry Editor Version 5.00
; Disable Shadowplay and nVidia Backend (NvBackend) (the little icon in the taskbar)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
- "NvBackend"="\"C:\\Program Files (x86)\\NVIDIA Corporation\\Update Core\\NvBackend.exe\""
- "ShadowPlay"="\"C:\\Windows\\system32\\rundll32.exe\" C:\\Windows\\system32\\nvspcap64.dll,ShadowPlayOnSystemStart"
Credits to CHEF-KOCH again
Windows/Driver Debloating?
Since you can debloat Windows, ill link the Tool on how to do it. It can be found here
There is also a Way to Debloat NVIDIA Drivers, which can be found here. Its pretty Self-Explainable
Here are some services you can disable to get about 50 Processes on Startup, written by me also this time https://linustechtips.com/topic/1261199-which-services-should-i-disable/?do=findComment&comment=14433444
If i find more stuff i will obv post it in here but that is it for now ❤❤