ProfBoots

Pinned Repositories

3D-Printed-RC-DumpTruck-2.0
Need to transport a pencil across your desk or perhaps a stack of sticky notes? Never fear the MiniDump is here.
Language:C++15 3 06
Baby-Wall-E
This Repository contains the Arduino code for Baby-Wall-e
Language:C++25 3 07
ChatGPT-On-Arduino
Language:C++15 1 03
DIY-Micro-FPV-Racing-Gate
This DIY project shows you how to build a lightweight, portable micro FPV racing gate for use in drone racing or freestyle flying. The project includes all necessary files and instructions, including 3D printable parts, electronics, and hardware. You'll need a 3D printer and some basic tools to get started.
Language:C++41
DIY-TinyWhoop-FPV-RacingGate
This repository features the code required to make the TinyWhoop Racing Gate function.
Language:C++30
Mini_Excavator
This repository includes the code for the 3D Printed RC Excavator Project
Language:C++26 1 411
MiniSkidi
Language:C++14 1 03
MiniSkidi-V3.0
Language:C++36 2 015
Modular-Arduino-Robot
This project is a modular Arduino robot that can be controlled wirelessly via Bluetooth. The robot has been designed to be easy to assemble and customize, making it a great tool for learning about robotics and DIY electronics. The robot can be controlled using a smartphone or other device, and can be programmed to perform a variety of tasks.
Language:C++30
V2.0-3D-Printed-RC-SkidSteer
Language:C++38 3 015

ProfBoots's Repositories

ProfBoots/V2.0-3D-Printed-RC-SkidSteer
Language:C++38 3 015
ProfBoots/MiniSkidi-V3.0
Language:C++36 2 015
ProfBoots/Mini_Excavator
This repository includes the code for the 3D Printed RC Excavator Project
Language:C++26 1 411
ProfBoots/Baby-Wall-E
This Repository contains the Arduino code for Baby-Wall-e
Language:C++25 3 07
ProfBoots/3D-Printed-RC-DumpTruck-2.0
Need to transport a pencil across your desk or perhaps a stack of sticky notes? Never fear the MiniDump is here.
Language:C++15 3 06
ProfBoots/ChatGPT-On-Arduino
Language:C++15 1 03
ProfBoots/MiniSkidi
Language:C++14 1 03
ProfBoots/DIY-Micro-FPV-Racing-Gate
This DIY project shows you how to build a lightweight, portable micro FPV racing gate for use in drone racing or freestyle flying. The project includes all necessary files and instructions, including 3D printable parts, electronics, and hardware. You'll need a 3D printer and some basic tools to get started.
Language:C++41
ProfBoots/DIY-TinyWhoop-FPV-RacingGate
This repository features the code required to make the TinyWhoop Racing Gate function.
Language:C++30
ProfBoots/Modular-Arduino-Robot
This project is a modular Arduino robot that can be controlled wirelessly via Bluetooth. The robot has been designed to be easy to assemble and customize, making it a great tool for learning about robotics and DIY electronics. The robot can be controlled using a smartphone or other device, and can be programmed to perform a variety of tasks.
Language:C++30
ProfBoots/ChatGPT-Controls-Robot
This repository is intended to be used with a ESP32 Development board. The ESP32 sets up a line of communication with CHATGPT and prompts it.
Language:C++2
ProfBoots/Mini-Dumptruck
This repository is intended to house the 3 seperate arduino sketchs that allow an esp32 development board to act as the brain of a RC dumptruck and be controlled via WIFI or game controller.
Language:C++2
ProfBoots/MiniLift
This repository includes the code for the 3D Printed RC Crane "MiniLift" Project
Language:C++