beepy-case

Beepy case with a heat sink and a metal kick stand

Parts List

Two printed parts (beepy_front, beepy_back_v2)
One sheet metal kick stand (stand_v2)
One heat sink (dimensions are shown in the figure below)
Two hand screws (2.5x5x5)
Four thin gaskets (2.5x5x0.5)
Eight plastic gaskets (2.5x5x1, paired and padded on the bolt holes between the heat sink and the raspberry pi)
Four injection molded nuts (2.5x3.5x3)
Six screws (2.5x5x8)
Two screws (2.5x5x6)