STM32WL Feather

Getting Started

Order a Board here: https://groupgets.com/campaigns/933

Install Zephyr 3.3.0 https://github.com/zephyrproject-rtos/zephyr/releases/tag/v3.3.0 Install West and compilers for all (or arm+risv V)

https://docs.zephyrproject.org/latest/develop/getting_started/index.html

For ubuntu 22.04 users There is a ./runme.sh script one can use to build and flash the code more easily.

if using the uart instead of the SWD jtag the latest version of stm32flash is needed or STM32CubeProgrammer. (PA9 and PA10 pins need to be wired) (115200 8E1) https://gitlab.com/stm32flash/stm32flash

Hardware

Feather sized: 2.0" x 0.9" x 0.3" (51mm x 23mm x 8mm) without headers
esp32-c3: USB<->uart, WiFi, BLE
stm32wl55: 64kb ram, 256 kB flash, Low Power Arm Core, Lora, (G)FSK, (G)MSK, BPSK
On board 3.3V regulator
USB-C directly to esp32-C3 and onboard Li-ion Charger
Bootloader and Reset buttons for both microcontrollers
SMA connector for 915Mhz stm32wl
On board Chip antenna for esp32-c3
stm32wl power control of the esp32-c3 for low power battery applications.
ADC, DAC, SPI, UART, GPIO accessible on Feather Header.
TC2030-CTX-NL JTAG connection
Optional BME688: temperature pressure humiditity, gas sensor, machine learning
Optional LIS2DTW12TR: accelerometer
Optional Li-ion Battery connector

Features

Uses latest Zephyr Project for both the esp32-c3 as well as the stm32wl
Ultra low power consumpion with stm32wl
Early Adopter utilizing a fully working Zephyr Project for Lora, WiFi, BLE, and sensors.

STM32WL Code

Zephyr Project Based example. Takes whatever data is received on the uart and sends it over lora to another device that send sends it out the uart. Effectively becoming a wireless uart bridge. Note that higher datarates are chosen for faster data rates at a reduction of range. For maximum range, adjustment are required at the tradeoff of lower speeds.

ESP32-C3 code

Zephyr Project Based example. Takes the USB uart data and relays it to the uart connected to the stm32wl. Effectively becoming a usb<->uart bridge. Additional functionally can be added such as BLE and Wi-Fi. Can use other programming environments such as arduino.

Intended Future Use Cases

Low power sensor reporting temperature, pressure, humidity over lora
Custom Lora USB/WiFi basestation
Amazon sidewalk sensor
LoRaWAN®, Sigfox, W-MBUS, mioty connected sensor

PureEngineering/stm32wlfeather