QIDITECH/QIDI_MAX3

Issues

• No Z lift from purge line to the startpoint of the print. If I use the travel lift and lift hight results in a crash

  #44 opened 6 months ago by Stoneprophet
  5

• Fill Gaps on First Layer

  #50 opened 8 months ago by r00tdownx
  4

• X-Max3 EMMC Image files on Website are outdated and for the wrong machine

  #55 opened 7 months ago by leckert123
  4

• Update Klipper to 0.12 and Python to Python 3

  #53 opened 7 months ago by boydenus
  50

• Security Issue / Question - Why is my Max3 sending outbound traffic to arksine.github.io?

  #54 opened 7 months ago by leckert123
  5

• Filament Break Detection not saving "ON".

  #52 opened 8 months ago by r00tdownx
  4

• Update klipper , Fluid and others as indicated

  #46 opened 8 months ago by pmbroth
  14

• Wiki to revert klipper/moonraker after updating

  #48 opened 8 months ago by billkenney
  4

• Z axis Home at X0 Y0? (resume feature)?

  #51 opened 8 months ago by r00tdownx
  2

• Update disable stop motion

  #49 opened 8 months ago by Booldegum
  1

• Reflashing Toolhead from 0.12 to stock

  #47 opened 8 months ago by leadustin
  34

• Install latest Debian + Klipper

  #38 opened 10 months ago by ffries
  23

• Saving zoffset reverts back to zero

  #35 opened 10 months ago by nutbox76
  18

• A option for manual leveling.

  #33 opened 8 months ago by r00tdownx
  6

• Avoiding collisions on Z

  #39 opened 8 months ago by ffries
  2

• Control board Fan constantly on. Can you disable it when not in use?

  #45 opened 8 months ago by 4eyez19
  12

• Bed Mesh not working during printing

  #43 opened 10 months ago by drewp29
  15

• Add unload button to pause menu

  #10 opened a year ago by Nazrac
  7

• Klipper crash after update firmware 4.3.13

  #32 opened 9 months ago by mirspan
  4

• Implement G28+SCREWS_TILT_CALCULATE

  #40 opened 9 months ago by ffries
  1

• Bed scratched when no PEI plate present

  #37 opened 9 months ago by ffries
  4

• Printer CFG still shows older version 4.3.11

  #42 opened 9 months ago by Waynedejager1
  1

• More information needed on Z geometry

  #41 opened 10 months ago by ffries
  1

• Max Volumetric Speed calibration size too big

  #36 opened 10 months ago by Mike3987
  4

• Adding Qidi to Home Assistant

  #29 opened a year ago by Mike3987
  2

• beste einstellung ABS+

  #34 opened 10 months ago by Anelke
  1

• Timelapse not working with 4.3.13

  #30 opened a year ago by VanAustee
  8

• Feature request - Current Print LAyer

  #21 opened a year ago by pmbroth
  8

• Date and Time

  #15 opened a year ago by mottld
  6

• Software shutdown of the 3D printer

  #31 opened a year ago by mirspan
  1

• Camera time-lapse stopped working.

  #27 opened a year ago by pganns
  1

• IP address for remote access

  #26 opened a year ago by mirspan
  2

• Motherbaord Fan still not spelled correctly

  #23 opened a year ago by pmbroth
  1

• Wrong code in events.cpp

  #25 opened a year ago by fran6p
  1

• Kann nicht Updaten

  #24 opened a year ago by Anelke
  3

• Filament Temp change when issuing M0, or filament change

  #20 opened a year ago by pmbroth
  1

• Only Black Thumbnails

  #12 opened a year ago by shubukin
  11

• Please provide an .stl of the printbed

  #19 opened a year ago by Phil1988
  2

• Filament wechsel

  #18 opened a year ago by Anelke
  1

• Please bring back the unload button!

  #17 opened a year ago by coderm4ster
  3

• Bug in macro M603 with v4.3.12

  #14 opened a year ago by fran6p
  3

• Info during printing

  #16 opened a year ago by czertique
  1

• Provide pinout for X-4 V1.1 motherboard

  #13 opened a year ago by cb-agotchi
  2

• Manual IP address information

  #9 opened a year ago by MarkusKgit
  1

• When loading the printer with filament, input the weight\length of filament

  #8 opened a year ago by trancified
  7

• mcu 'mcu': Unable to connect

  #6 opened a year ago by rt1970
  8

• Park location is wrong

  #7 opened a year ago by Nazrac
  3

• Cannot rename disk for firmware update to ' ' with Linux

  #5 opened a year ago by uhthomas
  2

• Z axis inverted since update

  #3 opened a year ago by Booldegum
  5

• Nach Update auf 4.3.8 rammt Nozzle ins Bett

  #4 opened a year ago by rt1970
  2