QIDITECH/QIDI_Q1_Pro

Issues

• How to display message from user macro on printer display?

  #85 opened 3 days ago
  1

• 4.4.24 shows up as 4.4.23 when installed on Q1 Pro via offline update

  #84 opened 2 days ago
  2

• both of my q1 pro's led strips are flickering badly

  #83 opened 4 days ago
  1

• Case light takes >5 seconds to turn on/off

  #82 opened 3 days ago
  3

• Q1 find online V4.4.24 but is not available here in Github

  #80 opened 10 days ago
  2

• Save "don't show again"

  #79 opened 13 days ago
  1

• Instructions for updating klipper/moonraker for print_queue functionality

  #78 opened 21 days ago
  8

• Issue: Z-Offset Error

  #77 opened 21 days ago
  8

• Can you add features to monitor/report total power consumed during a print?

  #76 opened 23 days ago
  2

• Free 2-pin red port on the QIDI Q1 Pro adapter plate

  #75 opened a month ago
  2

• Compatibility third party WiFi dongles

  #74 opened a month ago
  3

• chamber exhaust fan in version 4.4.21

  #73 opened a month ago
  5

• The system starts abnormally!

  #72 opened a month ago
  0

• Dynamic adjustment of pressure advance

  #69 opened 2 months ago
  6

• Regarding Chamber Lights V4.4.21

  #68 opened 12 days ago
  9

• Filament manual unload

  #66 opened 2 months ago
  1

• Improve Hall sensor calibration

  #65 opened a month ago
  3

• Consider bundling mobileraker companion

  #62 opened 2 months ago
  3

• Security issues

  #61 opened 2 months ago
  1

• Printhead should home first for filament replacement

  #60 opened 2 months ago
  4

• Printer stops mid print since last update

  #59 opened 2 months ago
  29

• Wfi completely lost

  #57 opened 2 months ago
  12

• Pre-print sequence doesn't equal up Z-heights of each Z motor rod anymore

  #56 opened 2 months ago
  2

• Filament Load Routine on printer panel stalls after loading with 4.4.21

  #55 opened 2 months ago
  5

• Filament Sensor on QIDI Q1 Pro Continuously Reporting "Off" Despite Filament Present

  #53 opened 2 months ago
  8

• 希望优化进退料流程，让进退料时喷头移动到废料盒，并增加擦料流程。

  #52 opened 3 months ago
  11

• Name or service not know - Mainsail installation ERROR

  #51 opened 3 months ago
  15

• Date is not actually seems no ntpd is running

  #50 opened 3 months ago
  1

• Enable Beep on Display, diables speed button

  #49 opened 3 months ago
  3

• German Translation is missing with 4.4.20 after pressing "stop".

  #48 opened 3 months ago
  2

• Head crashes at the end using Timelaps with Parkposition. Printposition is shifted afterwards.

  #47 opened 2 months ago
  1

• Switch off all fans in standby/after cooling down at the end of printing

  #46 opened 2 months ago
  2

• Load, Replace Filament and Purge with .2mm Nozzle - Question

  #45 opened 3 months ago
  3

• increase minimal rpm of mainboard fan - inquiry

  #44 opened 3 months ago
  2

• 4.4.20 is missing 4.4.19 commits

  #43 opened 3 months ago
  1

• extruder fan is pulsing after print with temp around 50degC

  #41 opened 3 months ago
  3

• Camera stopped working after security updates

  #40 opened 3 months ago
  4

• Exhaust fan activate at complete print inquiry

  #39 opened 3 months ago
  6

• Wifi password length limitation

  #38 opened 3 months ago
  2

• Printer shut down on Display

  #37 opened 3 months ago
  1

• Q1_Pro_V4.4.19.zip Windows reports as Virus

  #36 opened 3 months ago
  1

• Print time is not accurate when using Qidi slicer

  #35 opened 3 months ago
  2

• Thumbnails do not work until after the file is printed using Qidi slicer

  #34 opened 3 months ago
  2

• Please add option to delete files on the Qidi Q1 Pro printer screen interface

  #33 opened 3 months ago
  7

• Emergency Stop

  #32 opened 3 months ago
  5

• Misleading: Linux/FRPB!MTB

  #31 opened 3 months ago
  0

• Mainboard and toolhead board pinouts

  #30 opened 4 months ago
  11

• [BUG] Stopping after starting the job won't work

  #29 opened 2 months ago
  2

• Printer Doesn't Report Tangle to Fluidd / Remote Interface

  #28 opened 4 months ago
  1

• Release 4.4.19 moving target?

  #27 opened 4 months ago
  3