/media-driver

Primary LanguageCOtherNOASSERTION

Intel(R) Media Driver for VAAPI

Introduction

The Intel(R) Media Driver for VAAPI is a new VA-API (Video Acceleration API) user mode driver supporting hardware accelerated decoding, encoding, and video post processing for GEN based graphics hardware.

License

The Intel(R) Media Driver for VAAPI is distributed under the MIT license with portions covered under the BSD 3-clause "New" or "Revised" License. You may obtain a copy of the License at:

https://opensource.org/licenses/MIT

&

https://opensource.org/licenses/BSD-3-Clause

Prerequisites

For Ubuntu 16.04 and above

# apt install autoconf libtool libdrm-dev xorg xorg-dev openbox libx11-dev libgl1-mesa-glx libgl1-mesa-dev

Equivalents for other distributions should work.

Dependencies

Libva - https://github.com/intel/libva

GmmLib - https://github.com/intel/gmmlib (please check https://github.com/intel/media-driver/wiki/Comparability-with-GmmLib)

Building

  1. Build and install libva master
  2. Build and install gmmlib master
  3. Get media repo and format the workspace folder as below (suggest the workspace to be a dedicated one for media driver build):
<workspace>
    |- media-driver
$ mkdir <workspace>/build_media
$ cd <workspace>/build_media
$ cmake ../media-driver
$ make -j8

Install

$ sudo make install

This will install the following files (e.g. on Ubuntu):

-- Installing: /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so
-- Installing: /etc/profile.d/intel-media.sh
-- Installing: /usr/lib/x86_64-linux-gnu/igfxcmrt64.so

For iHD_drv_video.so please export related LIBVA environment variables.

export LIBVA_DRIVERS_PATH=<path-contains-iHD_drv_video.so>
export LIBVA_DRIVER_NAME=iHD

Supported Platforms

BDW (Broadwell)

SKL (Skylake)

BXT (Broxton) / APL (Apollo Lake)

KBL (Kaby Lake)

CFL (Coffee Lake)

CNL (Cannonlake)

ICL (Ice Lake)

Supported Codecs

CODEC BDW SKL BXT/APL KBL CFL CNL ICL
H.264 D/E1 D/E1 D/E1/E2 D/E1/E2 D/E1/E2 D/E1 D/E1/E2
MPEG-2 D/E1 D/E1 D D/E1 D/E1 D/E1 D/E1
VC-1 D D D D D D D
JPEG D D/E2 D/E2 D/E2 D/E2 D/E2 D/E2
VP8 D D D D D D/E1 D/E1
HEVC D/E1 D/E1 D/E1 D/E1 D/E1 D/E1/E2
HEVC 10bit D D D D/E1 D/E1/E2
VP9 D D D D D/E2
VP9 10bit D D D D/E2

D - decoding

E1 - VME based encoding

E2 - Low power encoding

Supported Video Processing

Video Processing BDW SKL BXT/APL KBL CFL CNL ICL
Blending Y Y Y Y Y Y Y
CSC (Color Space Conversion) Y Y Y Y Y Y Y
De-interlace Y Y Y Y Y Y Y
De-noise Y Y Y Y Y Y Y
Luma Key Y Y Y Y Y Y Y
Mirroring Y Y Y Y Y Y Y
ProcAmp (brightness,contrast,hue,saturation) Y Y Y Y Y Y Y
Rotation Y Y Y Y Y Y Y
Scaling Y Y Y Y Y Y Y
Sharpening Y Y Y Y Y Y Y
STD/E (Skin Tone Detect & Enhancement) Y Y Y Y Y Y Y
TCC (Total Color Control) Y Y Y Y Y Y Y
Color fill Y Y Y Y Y Y Y
Chroma Siting N Y Y Y Y Y Y

Known Issues and Limitations

  1. Intel(R) Media Driver for VAAPI is recommended to be built against gcc compiler v6.1 or later, which officially supported C++11.

  2. SKL: Green or other incorrect color will be observed in output frames when using YV12/I420 as input format for csc/scaling/blending/rotation, etc. on Ubuntu 16.04 stock (with kernel 4.10). The issue can be addressed with the kernel patch: WaEnableYV12BugFixInHalfSliceChicken7 commit 0b71cea29fc29bbd8e9dd9c641fee6bd75f6827

  3. HuC firmware is needed for AVC low power encoding bitrate control, including CBR, VBR, etc. As of now, HuC firmware support is disabled in Linux kernels by default. Please, refer to i915 kernel mode driver documentation to learn how to enable it. Mind that HuC firmware support presents in the following kernels for the specified platforms:

    • APL, KBL: starting from kernel 4.11
    • CFL: starting from kernel 4.15
  4. Restriction in implementation of vaGetImage: Source format (surface) should be same with destination format (image).

  5. ICL encoding and decoding require special kernel mode driver (issue#267/PR#271), please refer to i915 kernel mode driver documentation for supporting status.

(*) Other names and brands may be claimed as property of others.